









Rega Replay
Rega Replay - British hi-fi turntable with simple setup and precise sound
Rega Replay is a manual, belt-driven turntable that combines British hi-fi craftsmanship with simple operation and thoughtful design. After three years of development, Rega has created a turntable where sound quality and ease of use go hand in hand - without unnecessary features or complicated setup.
The hand-assembled RB110 tonearm, factory-fitted Rega Carbon MM cartridge, and low-noise 24V synchronous motor work together with a 23 mm phenolic resin platter to ensure stable rotation and precise vinyl playback.
With its factory-set tonearm and cartridge, Rega Replay is ready to use in under one minute when connected to a suitable hi-fi system. The result is a well-engineered turntable focused on musical engagement, detail, and dynamics.
Highlights - Rega Replay
- Manual, belt-driven hi-fi turntable, handmade in England
- Plug-and-play setup in under one minute
- Hand-assembled Rega RB110 tonearm with precision bearings
- Factory-fitted and adjusted Rega Carbon MM cartridge
- Low-noise 24V synchronous motor with low vibration
- Rega EBLT Advanced drive belt for stable power transmission
- 23 mm phenolic resin platter with improved flywheel effect
- Lightweight and rigid chassis with Skeletal Design
- Precision main bearing with brass housing
- Factory-set anti-skating and 111 g counterweight
- Manual speed selection for 33⅓ and 45 rpm
- Specially developed vibration-damping feet
- Removable dust cover and specially developed white turntable mat included
- Rega RB110 tonearm - Precise tracking without troublesome adjustment
Rega Replay is equipped with the hand-assembled RB110 tonearm, which uses Rega's patented ultra-low-friction precision bearings. The design allows the cartridge to follow the movements of the record groove with minimal mechanical resistance and creates ideal conditions for precise tracking and detailed sound reproduction.
The tonearm comes with factory-set anti-skating and a specially adapted 111-gram counterweight. This means you avoid the traditional adjustment of the tonearm's balance and tracking force.
Setup is simple: Push the counterweight all the way onto the back end of the tonearm, connect the turntable to a suitable phono input, and remove the stylus guard from the cartridge. Then you are ready to put on your first record.
The RB110 also has an ergonomically designed cartridge housing, making the tonearm comfortable and precise to use in everyday operation.
24V synchronous motor and EBLT Advanced drive belt
A stable rotational speed is crucial for natural pitch and accurate music reproduction. That is why Rega has developed a special 24V synchronous motor module for Replay, with a focus on low vibration, quiet operation, and speed stability.
The motor is assembled in a compact module with a CNC-machined aluminum pulley, integrated electronics, switch, and power connection. At the same time, the construction forms part of the turntable's rear support.
Rega's EBLT Advanced drive belt transfers the motor's rotation to the platter and contributes to smooth and stable operation.
Rega Replay supports both 33⅓ and 45 revolutions per minute. The speed is changed manually by moving the drive belt between the motor's pulley grooves.
Lightweight and rigid chassis with Rega's Skeletal Design
Rega Replay is based on the manufacturer's well-known principle of combining low mass with high rigidity. Instead of a heavy plinth, Rega uses a lightweight, laminated chassis with a black MDF core and a distinctive Skeletal Design.
The purpose is to limit the storage and transfer of unwanted vibrational energy while preserving the precise connection between the tonearm and the platter.
The chassis is supported by specially developed feet that increase stability and reduce the transfer of vibrations from the surface underneath.
At the same time, the minimalist construction gives Replay a simple and functional look, where each component has a clear purpose.
23 mm platter with improved speed stability
The platter on the Rega Replay is made of phenolic resin and has a thickness of 23 mm. The increased mass provides an improved flywheel effect, which helps keep the rotation stable and limits minor speed variations.
This is particularly relevant when reproducing long notes, piano, and acoustic instruments, where a consistent rotational speed affects the perceived pitch.
The platter works together with a precision main bearing with a brass housing, designed to ensure a proper fit and minimize mechanical stress around the bearing.
The included white felt mat is developed specifically for the platter surface. The mat's different surface textures ensure a stable grip between the mat and the platter.
Rega Carbon MM cartridge - Ready for vinyl from the first record
Rega Replay comes with a factory-mounted and adjusted Rega Carbon Moving Magnet cartridge. The combination of the Carbon cartridge and the RB110 tonearm provides a simple introduction to serious vinyl playback without the need for manual cartridge adjustment.
Carbon is developed with a focus on well-balanced and dynamic sound reproduction. The cartridge also has a replaceable stylus, so it can be maintained without replacing the entire cartridge.
The connection is made via the fixed RCA phono cable to an amplifier with an MM phono input or a separate RIAA preamp. The ground connection is integrated into the left signal channel, so a separate ground wire is not necessary.
Note: Rega Replay does not have a built-in RIAA preamp and therefore requires a suitable phono input or external RIAA preamp.
British hi-fi craftsmanship with more than 50 years of experience
Rega Replay is developed and hand-assembled in England and is built on more than 50 years of experience in turntable design.
Every component has been chosen with a focus on the interaction between the tonearm, motor, bearing, chassis, and cartridge. The result is a thoroughly designed manual turntable where technical solutions are prioritized over features that do not contribute to vinyl playback itself.
A specially developed, removable dust cover is included and protects the platter and tonearm from dust when the turntable is not in use.
Rega Replay - A simple path to serious vinyl playback
Rega Replay is an obvious choice for those who want a user-friendly hi-fi turntable without compromising on the basic design principles.
The hand-assembled RB110 tonearm, stable belt drive, and factory-adjusted Carbon cartridge make it easy to get started, while the lightweight chassis and solid platter form the foundation for precise analog sound reproduction.
With Replay, you get a turntable where Rega's experience and focus on sound quality are brought together in a simple design - created to keep the music at the center.
Choose options






















