{"title":"Børresen","description":"","products":[{"product_id":"borresen-z5","title":"Børresen Z5 Cryo Edition Black 2 pcs.","description":"\u003ch1\u003eBørresen Z5 Cryo Edition - BRING THE CONCERT HALL HOME TO YOUR LIVING ROOM\u003c\/h1\u003e\n\u003cp\u003eThe Børresen Z5 speaker astonishes with its ability to create a three-dimensional soundstage that makes even the most subtle musical details transparent. With its uncompromising musicality and high-resolution capability, the Z5 delivers an outstanding authentic listening experience. With the right amplifier, you can have a full concert hall right in your living room.\u003c\/p\u003e\n\u003ch2 data-start=\"410\" data-end=\"810\"\u003eDeveloped and manufactured at the factory in Aalborg\u003c\/h2\u003e\n\u003cp data-start=\"410\" data-end=\"810\"\u003eAll components are - just like Børresen’s other models - developed and manufactured in-house. This provides an unusual degree of control over both construction and acoustic performance. A good example is the speaker drivers, where traditional iron in the magnet system has been removed to avoid distortion. The result is a completely iron-free, magnetically precisely centered driver with extremely low inductance – something rarely seen in the industry.\u003c\/p\u003e\n\u003cp data-start=\"812\" data-end=\"1072\"\u003eThe diaphragm is built as an advanced sandwich construction with ultra-thin carbon fiber layers around a Nomex honeycomb core. This provides an optimal combination of low weight and high rigidity, ensuring precise and controlled movement – even with complex signals.\u003c\/p\u003e\n\u003cp data-start=\"1074\" data-end=\"1467\"\u003eThe tweeter is a further development of a classic principle, but elevated to a new level. With a moving mass of just 0.01 grams and a powerful magnet system, it delivers extremely fast and precise reproduction – without the artifacts and distortion normally associated with treble reproduction. The result is an exceptionally clean and uncolored top end, where the details stand out clearly without being artificially emphasized.\u003c\/p\u003e\n\u003ch2 data-end=\"1511\" data-start=\"1474\" data-section-id=\"n5wet5\"\u003eTechnology: Extensive cryogenic treatment\u003c\/h2\u003e\n\u003cp data-end=\"1874\" data-start=\"1513\"\u003eEven parts such as the crossover have been rethought. Advanced electronics are used here to stabilize the signal and further reduce distortion. At the same time, all metal parts undergo extensive cryogenic treatment down to -196°C, which changes the structure of the material and reduces internal stress. This results in improved conductivity and even more stable performance.\u003c\/p\u003e\n\u003ch2 data-end=\"1912\" data-start=\"1881\" data-section-id=\"ck3c9y\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eWhat you \u003cem data-end=\"2005\" data-start=\"1999\"\u003edon’t\u003c\/em\u003e hear\u003c\/h2\u003e\n\u003cp data-end=\"2012\" data-start=\"1914\"\u003eThe most remarkable thing about the Z5 Cryo Edition is not what you hear – but what you \u003cem data-end=\"2005\" data-start=\"1999\"\u003edon’t\u003c\/em\u003e hear.\u003c\/p\u003e\n\u003cp data-end=\"2210\" data-start=\"2014\"\u003eThere is no artificial emphasis, no exaggerated bass, and no affected warmth. Instead, you get an extremely honest reproduction, where the speakers adapt to the music, the room, and the rest of your system.\u003c\/p\u003e\n\u003cp data-end=\"2445\" data-start=\"2212\"\u003eThis means that at first listen they may seem restrained. But if you keep listening, you quickly discover how much information, dynamics, and nuance are actually present – without being wrapped in coloration or effects.\u003c\/p\u003e\n\u003cp data-end=\"2686\" data-start=\"2447\"\u003eFrom intimate vocals to complex orchestral recordings, the Z5 Cryo Edition reproduces the music with impressive ease and precision. Even in demanding passages, the overview is maintained, and every detail stands clearly in the soundstage without being masked.\u003c\/p\u003e\n\u003ch2 data-end=\"2852\" data-start=\"2720\"\u003eA true communicator of music\u003c\/h2\u003e\n\u003cp data-end=\"2852\" data-start=\"2720\"\u003eThe Børresen Z5 Cryo Edition is created for the discerning listener who does not want an “effect-driven” speaker – but a true communicator of music.\u003c\/p\u003e\n\u003cp data-end=\"3028\" data-start=\"2854\"\u003eHere, you do not get a speaker that tries to impress at first glance, but a solution that rewards immersion and delivers a top-class sound experience – every time.\u003c\/p\u003e\n\u003ch2 data-end=\"3053\" data-start=\"3035\" data-section-id=\"1ks0mmf\"\u003eSpecifications\u003c\/h2\u003e\n\u003cul data-end=\"3315\" data-start=\"3054\"\u003e\n\u003cli data-end=\"3094\" data-start=\"3054\" data-section-id=\"wdyp4j\"\u003e\n\u003cstrong data-end=\"3065\" data-start=\"3056\"\u003eType:\u003c\/strong\u003e Floorstanding speaker (bass reflex)\u003c\/li\u003e\n\u003cli data-end=\"3133\" data-start=\"3095\" data-section-id=\"7c8xpk\"\u003e\n\u003cstrong data-end=\"3116\" data-start=\"3097\"\u003eFrequency range:\u003c\/strong\u003e 25 Hz – 50 kHz\u003c\/li\u003e\n\u003cli data-end=\"3170\" data-start=\"3134\" data-section-id=\"17gvayr\"\u003e\n\u003cstrong data-end=\"3150\" data-start=\"3136\"\u003eSensitivity:\u003c\/strong\u003e 90 dB (1 W \/ 1 m)\u003c\/li\u003e\n\u003cli data-end=\"3194\" data-start=\"3171\" data-section-id=\"nqk61x\"\u003e\n\u003cstrong data-end=\"3186\" data-start=\"3173\"\u003eImpedance:\u003c\/strong\u003e 4 ohm\u003c\/li\u003e\n\u003cli data-end=\"3256\" data-start=\"3195\" data-section-id=\"1pqqi53\"\u003e\n\u003cstrong data-end=\"3209\" data-start=\"3197\"\u003eDrivers:\u003c\/strong\u003e Ribbon tweeter, 2 x 4.5” midrange, 4 x 8” bass\u003c\/li\u003e\n\u003cli data-end=\"3295\" data-start=\"3257\" data-section-id=\"1i5mgnp\"\u003e\n\u003cstrong data-end=\"3275\" data-start=\"3259\"\u003eDimensions (H\/W\/D):\u003c\/strong\u003e 231 \/ 151 \/ 70 cm\u003c\/li\u003e\n\u003cli data-end=\"3315\" data-start=\"3296\" data-section-id=\"l526rj\"\u003e\n\u003cstrong data-end=\"3307\" data-start=\"3298\"\u003eWeight:\u003c\/strong\u003e 75 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Børresen","offers":[{"title":"Borresen Z5 CRYO\/black","offer_id":47405135331601,"sku":"4816+5055","price":129000.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/products\/Borresen-Z5-speaker.jpg?v=1697451025"},{"product_id":"borresen-z1-med-stander","title":"Børresen Z1 CRYO with stand White (used)","description":"\u003cp\u003eThe BØRRESEN Z1 speaker amazes — despite its compact size — with its ability to create a three-dimensional soundstage that makes even the most subtle musical details transparent. With its uncompromising musicality and high-resolution capability, the Z1 delivers an outstandingly authentic listening experience.\u003c\/p\u003e\n\u003cp\u003eThe Børresen Z1 is available in 2 versions\u003c\/p\u003e\n\u003cp\u003eBørresen Z1\u003c\/p\u003e\n\u003cp\u003eBørresen Z1 CRYO with CRYO treatment \u003ca href=\"https:\/\/borresen-acoustics.com\/index.php\/borresen-cryo-edition\"\u003e(Read more)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/borresen-acoustics.com\/index.php\/the-speakers\/borresen-z1\"\u003eSpecifications\u003c\/a\u003e\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Default Title","offer_id":55233097138552,"sku":"4642+5038","price":34995.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/products\/Borresen-Z1-speaker.jpg?v=1764061527"},{"product_id":"borresen-x3","title":"Børresen X3 (sale)","description":"\u003ch1\u003eBørresen X3 - A revolution in quality, performance, and price\u003c\/h1\u003e\n\u003cp\u003eBørresen has developed a new entry-level speaker at a price that is accessible to even more people. The Børresen X3 speaker is designed on the solid foundation of Børresen Acoustics’ development traditions, design philosophy, and technological know-how.\u003c\/p\u003e\n\u003ch2 data-end=\"66\" data-start=\"38\"\u003eTechnologies and components\u003c\/h2\u003e\n\u003cp data-end=\"582\" data-start=\"68\"\u003eThe speakers in the Børresen X series are not just a new entry into the Børresen universe, but also represent a true revolution in quality and performance in their price class. These speakers are created on the basis of all the knowledge gathered during the development of the M, 0, and Z series. You will find components from these exclusive series in the Børresen X series – for example, the brand-new spread-tow carbon fiber diaphragm, the highly acclaimed Børresen ribbon tweeter, and the use of copper rings in the magnetic motor system.\u003c\/p\u003e\n\u003ch2 data-end=\"625\" data-start=\"589\"\u003eX series diaphragm – Bass\/midrange\u003c\/h2\u003e\n\u003cp data-end=\"841\" data-start=\"627\"\u003eThis diaphragm is designed to achieve maximum stiffness with minimal noise. The technological requirements for this outstanding high-end diaphragm performance made it necessary to design, develop, and assemble all components in-house.\u003c\/p\u003e\n\u003cp data-end=\"986\" data-start=\"843\"\u003eThe X3 diaphragm consists of three layers laminated into one unified unit: two layers of spread carbon fiber with a layer of aramid honeycomb spacer material in between.\u003c\/p\u003e\n\u003cp data-end=\"1498\" data-start=\"988\"\u003eThe combination of these materials gives the diaphragm its unique properties. The spread-tow carbon fiber is designed to create a surface with optimal stiffness. This unique property reduces sound-disturbing vibrations and resonances to an unprecedented level. At the same time, aramid honeycomb has the best possible stiffness-to-weight ratio in the vertical direction. A diaphragm with a flat resonance response paved the way for developing a highly transparent speaker with a reduced magnetic motor system to optimize costs.\u003c\/p\u003e\n\u003ch3 data-end=\"1546\" data-start=\"1505\"\u003eX series magnet system – Bass\/midrange\u003c\/h3\u003e\n\u003cp data-end=\"1991\" data-start=\"1548\"\u003eIn the X3’s magnetic motor system, double copper rings are used on the pole rings to achieve high flux and low inductance. The use of copper rings is borrowed from the Børresen Z series. Copper reacts to changes in flux – the better the counteraction from the copper rings, the flatter the inductance curve and the lower the electromagnetic resonance. In addition, lower inductance also means fewer peaks in the impedance curve. Both result in a lower load on the amplifier.\u003c\/p\u003e\n\u003cp data-end=\"2155\" data-start=\"1993\"\u003eTo ensure high efficiency, the X3 has two pole rings. This causes a certain loss of flux, which reduces efficiency, but this is compensated for by using a larger magnet.\u003c\/p\u003e\n\u003ch3 data-end=\"2190\" data-start=\"2162\"\u003eX series Børresen tweeter\u003c\/h3\u003e\n\u003cp data-end=\"2545\" data-start=\"2192\"\u003eThe tweeter in the Børresen X3 has the same basic design as in the other Børresen series. However, the magnet and iron mass have been reduced. This is possible thanks to the extremely high efficiency of the original tweeter design. Efficiency has therefore dropped only slightly from an exceptional 94 dB to 88 dB – which is still impressive efficiency for a tweeter.\u003c\/p\u003e\n\u003cp data-end=\"2840\" data-start=\"2547\"\u003eThe tweeter operates from approximately 2.5 kHz and up. The moving mass is extremely low – only 0.01 gram. The fully enclosed tweeter can operate at impressive speed. Its high robustness enables it to handle very powerful transients without causing unpleasant dips in the sound level.\u003c\/p\u003e\n\u003ch3 data-end=\"2869\" data-start=\"2847\"\u003eX series crossover\u003c\/h3\u003e\n\u003cp data-end=\"3059\" data-start=\"2871\"\u003eThe Børresen X3 is equipped with a parallel crossover built with the same high-quality components as in the Z series. This provides a very mechanically stable crossover that minimizes self-resonance.\u003c\/p\u003e\n\u003ch3 data-end=\"3085\" data-start=\"3066\"\u003eX series cabinet\u003c\/h3\u003e\n\u003cp data-end=\"3417\" data-start=\"3087\"\u003eThe cabinet surface is finished in black or white piano lacquer and reinforced with optical carbon fiber inserts. The cabinet is made from a heavily braced wood composite material with the property of eliminating sound distortion. The material also reduces mechanical influences, especially hysteresis. The sonic effect is clearly audible.\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"3625\" data-start=\"3419\"\u003eThe Børresen X3 cabinet has six bass reflex ports. The tweeter is vented to compensate for the air pressure that builds up. The bass range consists of tuned ports, calibrated to musically relevant frequencies.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black Piano","offer_id":47405275939089,"sku":"58891921-01","price":59996.0,"currency_code":"DKK","in_stock":true},{"title":"White Piano","offer_id":47405275971857,"sku":"58891921-02","price":59996.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/products\/Boerresen-X3-White-Speakers-Front-Skewed-total.jpg?v=1697453606"},{"product_id":"borresen-x6","title":"Børresen X6","description":"\u003ch2\u003eBørresen X6 - A revolutionary floorstanding speaker\u003c\/h2\u003e\n\u003cp\u003eBørresen X6 is the largest model in the X series, and it is a speaker in a class of its own. This is not merely a new entry-level speaker in the Børresen universe, because X6 also represents a true revolution in quality and performance in its price range. The speakers are created based on all the knowledge gathered in the process of creating the M-, 0- and Z series. That is why you will find components from these exclusive series in the Børresen X series - for example the brand-new Spread-tow carbon membrane, the acclaimed Børresen ribbon tweeter, and the use of copper caps in the magnetic motor system.\u003c\/p\u003e\n\u003cp\u003eWith Børresen X6, you get a sound experience that sets entirely new standards. The advanced technology and the components used ensure outstanding performance and precision. The Spread-tow carbon membrane and the ribbon tweeter deliver impressive clarity and richness of detail in the music. And the copper caps in the magnetic motor system help provide precise and controlled bass reproduction that will impress even the most demanding audio enthusiasts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnologies and Components\u003c\/h2\u003e\n\u003cp\u003eThe Børresen X series loudspeakers are not only a new entry-level into the Børresen universe, but also represents a real revolution in quality and performance in its price range. These speakers are created based on all the knowledge collected in the process of the creation of the M, 0 and Z-series. You´ll find components from these exclusive series in this Børresen X series loudspeakers – for instance the brand new Spread-tow carbon membrane, the highly praised Børresen ribbon tweeter and the use of copper caps in the magnetic motor system.\u003c\/p\u003e\n\u003ch3\u003eX series membrane – Bass\/midrange\u003c\/h3\u003e\n\u003cp\u003eThis membrane is designed to achieve maximum stiffness with minimum noise. The technological requirements for this unrivaled high-end membrane performance made it necessary to design, develop and assemble all components in-house.\u003c\/p\u003e\n\u003cp\u003eThe X6 membrane that consists of three skins laminated into a single unit: two layers of spread carbon fiber, with a layer of aramid honeycomb spacers in between.\u003c\/p\u003e\n\u003cp\u003eThe combination of these materials gives this membrane its unique properties. The spread-tow carbon fiber was designed to provide a skin with optimal stiffness. This unique feature of the membrane reduces sound-disturbing vibrations and resonances to unprecedented levels. The aramid honeycomb also has the best stiffness-to-weight ratio in the vertical direction. A flat response membrane in terms of resonances paved the way to build a very transparent loudspeaker with a reduced size of the magnetic motor system to optimize costs.\u003c\/p\u003e\n\u003ch3\u003eX series magnet system – Bass\/midrange\u003c\/h3\u003e\n\u003cp\u003eIn the X6 magnet motor system, we use double copper caps on the pole rings to achieve high flux and low inductance. The use of copper caps has been adopted from the Børresen Z-series. Copper produces a response to flux changes – the better the counter-effect of these copper rings, the flatter the inductance curve, and the lower the electro-magnetic resonance. In addition, lower inductance also means fewer spikes in the impedance curve. Both result in a lower load on the amplifier. To ensure high efficiency, the X3 has two pole rings. This causes the loss of some flux, which reduces efficiency, but this is compensated for by a larger magnet.\u003c\/p\u003e\n\u003ch3\u003eX series Børresen tweeter\u003c\/h3\u003e\n\u003cp\u003eThe tweeter chosen for the Børresen X6 has the same design used in all other Børresen loudspeaker series. However, there is a reduction in magnet and iron mass. This is possible due to the extremely high efficiency of the original tweeter design. As a result, the efficiency has dropped only slightly from the exceptional 94 dB to 88 dB, but this is still an amazing efficiency for a tweeter.\u003c\/p\u003e\n\u003cp\u003eThe tweeter operates from about 2.5 kHz upwards. The moving mass is extremely low at 0.01 grams. The fully concealed tweeter can operate at an impressive speed. The high robustness of this tweeter allows it to handle very high transients without causing any deafening dips.\u003c\/p\u003e\n\u003ch3\u003eX series cross over\u003c\/h3\u003e\n\u003cp\u003eThe Børresen X6 is equipped with a parallel crossover built with the same high-quality components from the Z Series. This makes for a very mechanically stable crossover that minimizes its self-resonance.\u003c\/p\u003e\n\u003ch3\u003eX series cabinet\u003c\/h3\u003e\n\u003cp\u003eThe surface of the cabinet of the new X6 speaker is finished in an elegant black or white piano lacquer and reinforced with optical carbon fiber inserts. The cabinet itself is made of a heavily braced wood composite material that has the property of eliminating sound distortion. The material used for the cabinet also reduces mechanical influences, especially hysteresis. The sonic result is clearly audible. The Børresen X6 cabinet has six bass reflex ports. The tweeter is vented to compensate for the air pressure that builds up. The bass section consists of tuned ports calibrated for musically relevant frequencies.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black Piano","offer_id":47405370179857,"sku":"72369872-01","price":149995.0,"currency_code":"DKK","in_stock":true},{"title":"White Piano","offer_id":47405370245393,"sku":"72369872-02","price":149995.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/products\/Boerresen-X6-Black-Pair-scaled.jpg?v=1697454553"},{"product_id":"borresen-x2","title":"Børresen X2 (sale)","description":"\u003ch2\u003eBørresen X2 - Revolutionary floorstanding speaker with sublime sound quality\u003c\/h2\u003e\n\u003cp\u003eThe Børresen X2 speaker series is a groundbreaking floorstanding speaker that uniquely combines quality, performance, and affordability. With these speakers, Børresen has developed an entry-level model that allows even more people to experience the extraordinary world of Børresen sound. The Børresen X2 speaker is built on the foundation of Børresen Acoustics' long development traditions, unique design philosophy, and in-depth technological expertise.\u003c\/p\u003e\n\u003ch3\u003eTechnologies and Components\u003c\/h3\u003e\n\u003cp\u003eBørresen X2 speakers are not merely an entry-level model in the Børresen family, but also represent a remarkable step forward in quality and performance in their price class. These speakers benefit from all the knowledge gained through the development of the M, 0, and Z series. Components from these exclusive series have been incorporated into the Børresen X2 speakers, including the innovative spread-tow carbon diaphragm, the highly acclaimed Børresen ribbon tweeter, and the use of copper caps in the magnetic motor system.\u003c\/p\u003e\n\u003ch3\u003eX2 Series Diaphragm – Bass\/Midrange\u003c\/h3\u003e\n\u003cp\u003eThe groundbreaking diaphragm in the X2 series is designed with the goal of achieving maximum stiffness and minimal noise. To achieve this unmatched performance, all components were designed, developed, and assembled in-house. The X2 diaphragm consists of three layers, laminated into a single unit: two layers of spread carbon fiber, with a layer of aramid honeycomb spacers in between. This unique composition of materials gives the diaphragm its exceptional properties. Spread carbon fiber is shaped to provide optimal stiffness, reducing disruptive sound vibrations and resonances to previously unseen levels. Aramid honeycomb has the best stiffness-to-weight ratio in the vertical direction. The flat response of the diaphragm, in terms of resonances, makes it possible to create an extremely transparent speaker with a smaller magnetic motor system to optimize costs.\u003c\/p\u003e\n\u003ch3\u003eUnique magnetic motor system\u003c\/h3\u003e\n\u003cp\u003eIn the X2 series magnetic motor system, double copper caps are used on pole rings to achieve high flux and low inductance. This technology has been borrowed from the Børresen Z series. Copper helps reduce electromagnetic resonance by counteracting changes in flux, resulting in a flatter inductance curve and fewer peaks in the impedance curve. This reduced inductance puts less strain on the amplifier. To ensure high efficiency, the X2 series is equipped with two pole rings, and any loss of flux is compensated for by a larger magnet.\u003c\/p\u003e\n\u003ch3\u003eUltra-light tweeter without distortion\u003c\/h3\u003e\n\u003cp\u003eThe tweeter selected for the Børresen X2 series uses the same basic design as in all other Børresen speaker series. However, a reduction in magnet and iron mass has been achieved thanks to the extremely efficient design. This results in only a slight reduction in efficiency from the remarkable 94 dB to 90 dB, which is still a remarkable efficiency for a tweeter. The tweeter operates from approximately 2.5 kHz and up. With an extremely low moving mass of just 0.01 grams, the tweeter can respond incredibly quickly. The high robustness makes it possible to handle very sharp transients without causing muted tones.\u003c\/p\u003e\n\u003ch3\u003ePremium crossover components from the Z series\u003c\/h3\u003e\n\u003cp\u003eThe Børresen X2 series is equipped with a parallel crossover that uses the same premium components as the Z series. This results in a very mechanically stable crossover that minimizes self-resonance.\u003c\/p\u003e\n\u003ch3\u003eX2 Series Cabinet\u003c\/h3\u003e\n\u003cp\u003eThe cabinet surface is elegantly finished in black piano lacquer and reinforced with carbon fiber inserts. The cabinet is made from a heavily reinforced wood composite that eliminates sound distortion and reduces mechanical effects, including hysteresis. This construction provides superior sound reproduction. The X2 series is equipped with bass reflex ports, and the tweeter is vented to compensate for building air pressure. The bass section contains tuned ports calibrated to musically relevant frequencies.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Børresen X2 speakers combine these technological innovations and components to deliver a remarkable sound experience. The exceptional diaphragm, advanced magnetic motor, and high-performance tweeter ensure that the music is reproduced with incredible clarity and precision. This series of speakers offers exceptional quality and performance in its price class and is the ideal choice for audio enthusiasts seeking an affordable path into the Børresen universe. Børresen X2 speakers are not merely speakers; they are the gateway to an exceptional musical experience.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black","offer_id":48299524260113,"sku":"47573144305937","price":48000.0,"currency_code":"DKK","in_stock":true},{"title":"White","offer_id":48299524325649,"sku":"47573144305938","price":48000.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Boerresen-X2-Black-Front-Side-Angle.jpg?v=1698766765"},{"product_id":"borresen-m1","title":"Børresen M1","description":"\u003ch2\u003eBørresen M1 - Ultra high-end compact speaker with a huge soundstage\u003c\/h2\u003e\n\u003cp\u003eBørresen M1 is the absolute high-end version of a speaker that incorporates all the premium elements from the most innovative and advanced audio technologies represented by Ansuz, Aavik, and Børresen alike. The performance of the M1 speaker makes it necessary to redefine the quality of absolute high-end music reproduction.\u003c\/p\u003e\n\u003cp\u003eIn designing the Børresen M speaker series, the overall goal was to challenge existing technological limitations and pioneer into new and unconventional areas of audio technology. This includes the entirely new design of speaker components, finding effective ways to combat resonance and vibrations, and searching for materials that provide the ultimate properties to elevate sound quality to unprecedented new levels.\u003c\/p\u003e\n\u003ch3\u003e3D-printed basket in zirconium\u003c\/h3\u003e\n\u003cp\u003eThe M1 speaker's basket is a true revolution – it is a topology-optimized 3D-printed basket made of zirconium, ensuring maximum rigidity and therefore minimum vibration and resonance. The basket is not merely a holder for the diaphragm, because the energy generated by the diaphragm is also carried by the structure behind it. The goal was therefore to eliminate noise from the basket by designing a basket with maximum rigidity. Studies were carried out using computer-optimized finite element design, resulting in a topology-optimized 3D-printed basket made of exclusive zirconium.\u003cbr\u003e\u003cbr\u003eBørresen has not only designed a basket with extreme rigidity - they have also added important factors such as enormous internal damping and resonance control, resulting in extreme clarity in overall performance. Thanks to the 3D printing process, the cavities are filled with zirconium powder, which gives the basket additional damping properties. Zirconium is by far the best choice of material, as it allows the basket to generate an incredibly natural sound.\u003c\/p\u003e\n\u003ch3\u003eA bass\/midrange diaphragm with maximum rigidity and minimal noise\u003c\/h3\u003e\n\u003cp\u003eThe diaphragm is designed to achieve maximum rigidity with minimal noise. The diaphragm for M1 is the most advanced and sophisticated speaker diaphragm on the market. The M1 diaphragm has the highest rigidity and the lowest diaphragm resonance. The technological requirements for this unrivaled, world-class diaphragm performance made it necessary to design, develop, and assemble all components in-house. Michael Børresen and his team had to construct a large number of different variants and models until they achieved their uncompromising goal of ultimate diaphragm performance for unprecedented sound quality.\u003cbr\u003e\u003cbr\u003eThe result is a diaphragm consisting of four layers of laminates in a single unit: two layers of spread tow carbon fiber, a layer of aramid honeycomb in between, and a titanium layer with Ansuz Supreme coating.\u003c\/p\u003e\n\u003cp\u003eThe combination of all these materials gives this state-of-the-art diaphragm its unique properties. Spread tow carbon fiber is designed to ensure a skin with optimal rigidity in many different directions. This unique characteristic reduces sound-disturbing vibrations and resonances to an unprecedented low level. This also applies to resonances in the frequency range above 8 kHz. Since the diaphragm\/speaker is used up to the 2.5 kHz range, disturbing resonances have been moved two octaves outside the effective frequency range, ensuring an absolute minimum of resonances. Aramid honeycomb also has the best stiffness-to-weight ratio in the vertical direction.\u003cbr\u003e\u003cbr\u003eTitanium has perfect resonance control properties and supports a natural, organic sound from the diaphragm. With the Ansuz Supreme coating, the diaphragm skin is further acoustically optimized. This coating is applied to the titanium skin in a Hi-PIMS (High Power Impulse Magnetron Sputtering) machine to create the finest and most uniform layer of zirconium, followed by a layer of tungsten and finished with a layer of aluminum chromium nitride. This coating gives the music truly impeccable sound quality.\u003c\/p\u003e\n\u003ch3\u003eAn iron-free magnet system with silver\u003c\/h3\u003e\n\u003cp\u003eThe patented Børresen iron-free magnetic system has been further refined. Børresen uses iron-free drivers in all its speakers. Their inductance is approximately ten times lower than that of conventional drivers. This extremely low inductance has now been further reduced to an unprecedented new minimum level – approximately 12 times lower than the inductance level of conventional iron-based drivers. This is because silver has 6-8% better conductivity than copper, and Børresen has replaced the copper pole rings with in-house manufactured handcrafted silver rings.\u003cbr\u003e\u003cbr\u003eTo take full advantage of all the performance-enhancing sonic properties of the Børresen M series, all other metal parts of these premium speakers also undergo cryogenic treatment. This reduces their inductance by a further 6-8%. The result is complete musical purity. With their unadulterated authenticity of music reproduction, these premium speakers set a new and unmatched standard – clarity, refinement, and imaging at its absolute best.\u003c\/p\u003e\n\u003ch3\u003eCryogenically treated for enormous improvement\u003c\/h3\u003e\n\u003cp\u003eCryogenic treatment of all metal parts of the speaker results in a further significant improvement in conductivity – thereby releasing the finest and most subtle musical details. When metal parts undergo cryogenic treatment, they are exposed to extreme cooling. In the wake of this process, the metal structure contracts more and more. Alloying elements are pushed out of the grain structure of the metal, which now becomes much more like a monocrystal. These structural changes in metal have a profound effect on its sonic properties, resulting in an increase in conductivity of 6-8%.\u003cbr\u003e\u003cbr\u003eAll metal parts of these speaker series undergo cryogenic treatment. The cryogenic treatment cycle requires a time window of 3 days. Within the first 24 hours, the metal undergoes a cooling process from room temperature to cryogenic temperatures. During the next 24 hours, the metal parts are kept at temperatures around -196°C (-321°F) before the temperature, within the following 24 hours, gradually returns to room temperature. The gradual cooling and heating are crucial to avoid thermal stress. The process strengthens and compresses the grain structure of the metal parts and reduces the inherent residual stress that occurs when metal solidifies from its liquid phase to a solid phase.\u003c\/p\u003e\n\u003ch3\u003eBørresen tweeter with extraordinary efficiency\u003c\/h3\u003e\n\u003cp\u003eElaborate finite element methods have been applied to linearize and optimize the magnetic flux field, to facilitate the driver's movement and ensure high efficiency and exceptional linearity.\u003cbr\u003e\u003cbr\u003eThe efficiency of this closed ribbon tweeter amounts to an extraordinary 94dB and operates from approximately 2.5 kHz and up. The moving mass is extremely low at 0.01 gram. The fully concealed tweeter has the capacity to work at incredible speed, which is an absolute prerequisite for unlocking the most subtle and refined sonic details from any kind of music. The enormous robustness of this tweeter allows it to handle extremely high transient peaks without any ear-fatiguing interruptions. No transformers are used.\u003c\/p\u003e\n\u003ch3\u003eSeries connection for a coherent system\u003c\/h3\u003e\n\u003cp\u003eBørresen speakers are equipped with a series connection configuration. The reason for this is that drivers share the same flow of electrical current in the crossover region. As a result, the electrical current is phase-locked across the crossover region. In contrast to standard parallel filtering, where each driver receives its own frequency and phase content, the new series filters work by redirecting out-of-band currents around the current flows, creating a much more coherent system. This unrivaled and innovative technological approach takes your music to a new echelon of acoustic pleasure.\u003cbr\u003e\u003cbr\u003eFor the crossover filter, Børresen has also gone to great lengths to find the best and most sophisticated state-of-the-art components. The coils are foil types wound with paper insulation and impregnated with resin under vacuum to make them mechanically extremely solid and stable.\u003cbr\u003e\u003cbr\u003eFor crossover capacitors, several arrays of small military-spec stacked-foil types have been used. They have the best mechanical stability and lowest induction of any type of capacitor on the market (and they also sound wonderful). For tweeter damping resistors, metal-strip types are used, as they have by far the lowest noise figures and additionally very low thermal variation.\u003c\/p\u003e\n\u003ch3\u003eA redesigned and reinforced cabinet\u003c\/h3\u003e\n\u003cp\u003eThe design is an evolution and optimization of the fantastic Børresen 01 cabinet. To ensure even higher performance, the M1 cabinet is constructed with an additional 5 mm of reinforced, block-milled, compressed wood structures. In addition, braces are built into the sides of the speaker to give the cabinet even more rigidity and mechanical stability. The tweeter and woofer sections are equipped with matched terminals to ensure the highest efficiency. The cabinet is finished in black piano lacquer.\u003c\/p\u003e\n\u003ch3\u003eM1 stand – Aesthetics with sonic potential\u003c\/h3\u003e\n\u003cp\u003eThe stand for the M1 speaker was designed with auditory functionality in mind to ensure the impressive performance of this world-class speaker. The speaker is placed on the carefully machined top plate, which is constructed as a sandwich solution. The base material is a heavy, compact laminate panel with titanium layers on top and bottom. This unique sandwich construction supports a natural and organic sound.\u003cbr\u003e\u003cbr\u003eThree Ansuz Darkz Z2S resonance control decouplers are placed almost invisibly between the speaker and the top plate. Darkz Z2S is made of zirconium and represents the flagship version among the resonance control decouplers.\u003c\/p\u003e\n\u003ch3\u003eAnsuz Darkz Z2S - Invisible Resonance Control\u003c\/h3\u003e\n\u003cp\u003eWith Ansuz Darkz Z2S, Børresen M1 has built-in advanced resonance control decouplers that ensure superior mechanical anchoring of the speaker to the stand or floor. These decouplers absorb unwanted vibrations that are not directly related to the audio signal, resulting in cleaner and more authentic sound quality.\u003c\/p\u003e\n\u003ch3\u003eInternally wired with Ansuz Gold Signature\u003c\/h3\u003e\n\u003cp\u003eM1 is equipped with Ansuz Gold Signature cables, representing the very best in audio cable technology. These cables ensure extremely clear, natural, and authentic sound reproduction that lets you hear every single nuance of your music.\u003c\/p\u003e\n\u003ch3\u003eTesla Coil principle\u003c\/h3\u003e\n\u003cp\u003eBørresen M1 uses Tesla Coil technology, which eliminates noise and improves musical clarity. This advanced technology works by generating opposing voltages to neutralize noise, resulting in markedly improved sound reproduction.\u003c\/p\u003e\n\u003ch3\u003eActive Square Tesla Coils\u003c\/h3\u003e\n\u003cp\u003eWith active square Tesla coils integrated into the circuit boards, M1 achieves impressive noise reduction, ensuring cleaner and more precise sound reproduction.\u003c\/p\u003e\n\u003ch3\u003eAnalog Dither Technology 3rd Generation\u003c\/h3\u003e\n\u003cp\u003eThe third generation of Ansuz analog dither technology ensures an even greater improvement in sound quality by amplifying the musical signal and reducing background noise, delivering an even more detailed and open sound experience.\u003c\/p\u003e\n\u003ch3\u003eAnti Aerial Resonance Coil Technology\u003c\/h3\u003e\n\u003cp\u003eM1 is equipped with Anti Aerial Resonance Coil Technology, which effectively eliminates airborne noise and ensures clean signal transmission without interference.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black Piano","offer_id":48030419550481,"sku":"48030419550481","price":750000.0,"currency_code":"DKK","in_stock":true},{"title":"White Piano","offer_id":48030419583249,"sku":"48030419583249","price":750000.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Boerresen-M1-Front-Skewed-Total-Speakers-pair.jpg?v=1706393399"},{"product_id":"borresen-m3","title":"Børresen M3","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eBørresen M3 - Uncompromising high-end speaker with sublime sound quality\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBørresen M3 is an uncompromising floorstanding speaker that reproduces your recordings with the utmost realism and authenticity. In the past, speakers have never been able to reproduce recordings with the same realism as a live concert, but with the M3 series, Børresen has transcended this boundary. Here you get exceptional sound reproduction in a slim and elegant design that stands as a testament to Børresen’s constant pursuit of perfection.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mission of the M series is to challenge existing technological limitations and pioneer entirely new and unconventional areas of audio technology. This has resulted in a completely new design of speaker components, effective ways to combat resonance and vibrations, and materials that provide the ultimate properties to elevate sound quality to a level never seen before.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e3D-printed basket in zirconium\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe M3 speaker’s basket is a true revolution – it is a topology-optimized 3D-printed basket made of zirconium, ensuring maximum rigidity and therefore minimum vibration and resonance. The basket is not merely a placeholder for the diaphragm, because the energy generated by the diaphragm is also held by the structure behind it. The goal was therefore to eliminate noise from the basket by designing one with maximum rigidity. Studies were carried out using computer-optimized finite element design, resulting in a topology-optimized 3D-printed basket made from exclusive zirconium.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBørresen has not only designed a basket with extreme rigidity - they have also added important factors such as enormous internal damping and resonance control, resulting in extreme clarity in the overall performance. Thanks to the 3D printing process, the cavities are filled with zirconium powder, giving the basket additional damping properties. Zirconium is by far the best material choice, as it allows the basket to generate an incredibly natural sound.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eA bass\/midrange diaphragm with maximum rigidity and minimal noise\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe diaphragm is designed to achieve maximum rigidity with minimal noise. The diaphragm for M3 is the most advanced and sophisticated speaker diaphragm on the market. The M3 diaphragm has the highest rigidity and the lowest diaphragm resonance. The technological demands for this unparalleled, world-class diaphragm performance made it necessary to design, develop, and assemble all components in-house. Michael Børresen and his team had to engineer a large number of different variants and models until they achieved their uncompromising goal of ultimate diaphragm performance for unprecedented sound quality.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe result is a diaphragm consisting of four laminate layers in a single unit: two layers of spread tow carbon fiber, one layer of aramid honeycomb in between, and a titanium layer with Ansuz Supreme coating.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe combination of all these materials gives this state-of-the-art diaphragm its unique properties. Spread tow carbon fiber is designed to ensure a skin with optimal rigidity in many different directions. This unique characteristic reduces sound-disturbing vibrations and resonances to an unprecedentedly low level. This also applies to resonances in the frequency range above 8 kHz. Since the diaphragm\/speaker is used up to the 2.5 kHz range, disturbing resonances have been moved two octaves beyond the effective frequency range, ensuring an absolute minimum of resonances. Aramid honeycomb also has the best stiffness-to-weight ratio in the vertical direction.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTitanium has perfect resonance-control properties and supports a natural, organic sound from the diaphragm. With the Ansuz Supreme coating, the diaphragm skin is further acoustically optimized. This coating is applied to the titanium skin in a Hi-PIMS (High Power Impulse Magnetron Sputtering) machine to create the finest and most uniform layer of zirconium, followed by a layer of tungsten and finished with a layer of aluminum chromium nitride. This coating gives the music truly impeccable sound quality.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eAn iron-free magnet system with silver\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe patented Børresen iron-free magnetic system has been refined even further. Børresen uses iron-free drivers in all of its speakers. Their inductance is approximately ten times lower than that of conventional drivers. This extremely low inductance has now been reduced further to an unprecedented new minimum level – approximately 12 times lower than the inductance level of conventional iron-based drivers. This is because silver has 6-8% better conductivity than copper, and Børresen has replaced the copper pole rings with in-house manufactured sterling silver rings.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTo take full advantage of all the performance-enhancing sonic properties of the Børresen M series, all other metal parts in these premium speakers also undergo cryogenic treatment. This reduces their inductance by a further 6-8%. The result is complete musical purity. With their unadulterated authenticity of music reproduction, these premium speakers set a new and unmatched standard – clarity, refinement, and sound imaging at its absolute best.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eCryogenically treated for a huge improvement\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCryogenic treatment of all metal parts in the speaker results in a further significant improvement in conductivity – thereby releasing the finest and most subtle musical details. When metal parts undergo cryogenic treatment, they are subjected to extreme cooling. In the wake of this process, the metal structure contracts more and more. Alloying elements are pushed out of the grain structure of the metal, which now becomes very similar to a monocrystal. These structural changes in metal have a profound effect on its sonic properties, resulting in an increase in conductivity of 6-8%.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAll metal parts in these speaker series undergo cryogenic treatment. The cryogenic treatment cycle requires a time window of 3 days. Within the first 24 hours, the metal undergoes a cooling process from room temperature to cryogenic temperatures. During the next 24 hours, the metal parts are kept at temperatures around -196°C (-321°F) before the temperature, over the following 24 hours, gradually returns to room temperature. The gradual cooling and heating are crucial to avoid thermal stress. The process strengthens and compresses the grain structure of the metal parts and reduces the inherent residual stress that occurs when metal solidifies from its liquid phase to a solid phase.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eBørresen tweeter with extraordinary efficiency\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eElaborate finite element methods have been used to linearize and optimize the magnetic flux field, in order to facilitate the driver’s movement and ensure high efficiency and outstanding linearity.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe efficiency of this closed ribbon tweeter amounts to an extraordinary 94dB and operates from approximately 2.5 kHz and upward. The moving mass is extremely low at 0.01 grams. The fully concealed tweeter has the capacity to operate at incredible speed, which is an absolute prerequisite for unlocking the most subtle and refined sonic details in any kind of music. The enormous robustness of this tweeter allows it to handle extremely high transient peaks without any ear-fatiguing interruptions. No transformers are used.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSeries connection for a coherent system\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBørresen speakers are equipped with a series connection configuration. The reason for this is that drivers share the same electrical current in the crossover region. As a result, the electrical current is phase-locked across the crossover region. Unlike standard parallel filtering, where each driver receives its own frequency and phase content, the new series filters work by redirecting out-of-band currents around the current flows, creating a much more coherent system. This unparalleled and innovative technological approach takes your music to a new echelon of acoustic delight.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor the crossover filter, Børresen has also gone to great lengths to find the best and most sophisticated state-of-the-art components. The coils are foil types wound with paper insulation and vacuum-impregnated with resin to make them mechanically extremely solid and stable.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor crossover capacitors, several rows of small military-spec stacked-foil types have been used. They have the best mechanical stability and the lowest inductance of any type of capacitor on the market (and they also sound wonderful). For tweeter damping resistors, metal-strip types are used, as they have by far the lowest noise figures and additionally very low thermal variation.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eA redesigned and reinforced cabinet\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe design is an evolution and optimization of Børresen’s fantastic 0-series cabinet. To ensure even higher performance, the M3 cabinet is constructed with an additional 5 mm of reinforced, block-milled, pressure-formed wood structures. In addition, braces are built into the sides of the speaker to give the cabinet even more rigidity and mechanical stability. The tweeter and bass sections are equipped with matched terminals to ensure the highest efficiency. The cabinet is finished in black piano lacquer.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eInternal cabinet M – Improves balance\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe larger cabinet has also improved ventilation behind the bass\/midrange nozzles. This results in less compression and therefore a much faster and more agile speaker driver, which has a significantly positive impact on the overall soundstage. In addition, the bass is equipped with a bass reflex section inside the cabinet, ensuring a dynamic and harmonious balance between midrange and bass.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eThe M3 driver configuration\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eM3 is equipped with 4 unique 4.5″ M series units. These drivers are connected in series in pairs, so that one pair functions as a bass\/midrange and another pair functions as a bass speaker driver. This approach ultimately results in increased speed, precision, and depth, enriching the speaker with far greater musicality.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eBi-amping\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBoth M3 and M6 offer the possibility of bi-amping, allowing you to power the bass and midrange\/tweeter sections individually. This not only provides sufficient power to each section, but also results in a cleaner, more precise sound.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese speakers are designed with two types of bi-amping in mind. The first is speaker-crossover bi-amping. The frequency between the bass section and the midrange\/tweeter section is optimized in accordance with the M3 and M6 design, so it delivers the best performance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe second option is active crossover bi-amping, where you can adjust the crossover frequency yourself. This type of crossover is the optimal solution for fine-tuning your speakers according to the acoustic characteristics of your listening room, allowing you to control the amount of bass and the balance between bass and midrange\/tweeter. To further enhance your listening experience, Børresen’s sister company, Aavik Acoustics, has developed a high-end Analog Active Filter that works seamlessly with these new speaker models and delivers the ultimate in precision and clarity.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eInternally wired with Ansuz Gold Signature\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eM3 is equipped with Ansuz Gold Signature cables, representing the very pinnacle of audio cable technology. These cables ensure extremely clear, natural, and authentic sound reproduction that lets you hear every single nuance of your music.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eThe Tesla Coil principle\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBørresen M3 uses Tesla Coil technology that eliminates noise and improves musical clarity. This advanced technology works by generating opposite voltages to neutralize noise, resulting in significantly improved sound reproduction.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eActive Square Tesla Coils\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith active square Tesla coils integrated into the circuit boards, M3 achieves impressive noise reduction, ensuring cleaner and more precise sound reproduction.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eAnalog Dither Technology 3rd Generation\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe third generation of Ansuz analog dither technology ensures an even greater improvement in sound quality by amplifying the musical signal and reducing background noise, providing an even more detailed and open listening experience.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eAnti Aerial Resonance Coil Technology\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eM3 is equipped with Anti Aerial Resonance Coil Technology, which effectively eliminates airborne noise and ensures clean signal transmission without interference.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black Piano","offer_id":48045047808273,"sku":"48045047808273","price":1850000.0,"currency_code":"DKK","in_stock":true},{"title":"White Piano","offer_id":48045047841041,"sku":"48045047841041","price":1850000.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Boerresen-M3-Front-skewed-total.jpg?v=1706518842"},{"product_id":"borresen-m6","title":"Børresen M6","description":"\u003ch2\u003eBørresen M6 - An ultra high-end floorstanding speaker with a huge soundstage\u003c\/h2\u003e\n\u003cp\u003eThe Børresen M6 speakers represent not just a technological masterpiece - they are the symbol of what is possible when you are completely uncompising in your pursuit of perfection. Inspired by the legendary M1 speaker, the M6 is a natural extension of Børresen’s successful design philosophy, which is both aesthetically appealing and exceptionally great-sounding. Every detail has been conceived and executed with outstanding craftsmanship, and when you experience its soundstage, you will feel enveloped in a world of pure magic.\u003c\/p\u003e\n\u003cp\u003eWith 6 unique 4.5\" M-series drivers and a ribbon tweeter weighing only 0.01 grams, you get a sound experience that not only impresses with its precision, timing, and detail, but also immerses you in a world of unmatched musicality. Here, you get a speaker that challenges all existing technological limitations and pioneers entirely new and unconventional areas of audio technology. This has resulted in a completely new design of speaker components, effective ways to combat resonance and vibrations, and materials that provide the ultimate properties for elevating sound quality to a level never seen before.\u003c\/p\u003e\n\u003ch3\u003e3D-printed basket in zirconium\u003c\/h3\u003e\n\u003cp\u003eThe M6 speaker’s basket is a true revolution – it is a topology-optimized 3D-printed basket made of zirconium, ensuring maximum rigidity and therefore minimum vibration and resonance. The basket is not just a holder for the diaphragm, because the energy generated by the diaphragm is also absorbed by the structure behind it. The goal was therefore to eliminate noise from the basket by designing a basket with maximum rigidity. Studies were carried out using computer-optimized finite element design, resulting in a topology-optimized 3D-printed basket made from exclusive zirconium.\u003cbr\u003e\u003cbr\u003eBørresen has not only designed a basket with extreme rigidity - they have also added important factors such as enormous internal damping and resonance control, resulting in extreme clarity in overall performance. Thanks to the 3D printing process, the cavities are filled with zirconium powder, giving the basket additional damping properties. Zirconium is by far the best choice of material, as it allows the basket to generate an incredibly natural sound.\u003c\/p\u003e\n\u003ch3\u003eA bass\/midrange diaphragm with maximum rigidity and minimal noise\u003c\/h3\u003e\n\u003cp\u003eThe diaphragm is designed to achieve maximum rigidity with minimal noise. The diaphragm for the M6 is the most advanced and sophisticated speaker diaphragm on the market. The M6 diaphragm has the highest rigidity and the lowest diaphragm resonance. The technological requirements for this unmatched, world-class diaphragm performance made it necessary to design, develop, and assemble all components in-house. Michael Børresen and his team had to construct a large number of different variants and models until they achieved their uncompromising goal of ultimate diaphragm performance for a previously unheard-of level of sound quality.\u003cbr\u003e\u003cbr\u003eThe result is a diaphragm consisting of four laminate layers for a single driver: two layers of spread tow carbon fiber, a layer of aramid honeycomb in between, and a titanium layer with Ansuz Supreme coating.\u003c\/p\u003e\n\u003cp\u003eThe combination of all these materials gives this state-of-the-art diaphragm its unique properties. Spread tow carbon fiber is designed to ensure a skin with optimal rigidity in many different directions. This unique characteristic reduces sound-disturbing vibrations and resonances to a previously unseen low level. This also applies to resonances in the frequency range above 8 kHz. Since the diaphragm\/speaker is used up to the 2.5 kHz range, disturbing resonances have been moved two octaves outside the effective frequency range, ensuring an absolute minimum of resonances. Aramid honeycomb also has the best stiffness-to-weight ratio in the vertical direction.\u003cbr\u003e\u003cbr\u003eTitanium has perfect resonance-control properties and supports a natural, organic sound from the diaphragm. With the Ansuz Supreme coating, the diaphragm skin is further acoustically optimized. This coating is applied to the titanium skin in a Hi-PIMS (High Power Impulse Magnetron Sputtering) machine to create the finest and most uniform layer of zirconium, followed by a layer of tungsten and finished with a layer of aluminum chromium nitride. This coating gives the music truly impeccable sound quality.\u003c\/p\u003e\n\u003ch3\u003eAn iron-free magnet system with silver\u003c\/h3\u003e\n\u003cp\u003eThe patented Børresen iron-free magnetic system has been further refined. Børresen uses iron-free drivers in all of its speakers. Their inductance is approximately ten times lower than that of conventional drivers. This extremely low inductance has now been further reduced to an unprecedented new minimum level – approximately 12 times lower than the inductance level of conventional iron-based drivers. This is because silver has 6-8% better conductivity than copper, and Børresen has replaced the copper pole rings with in-house manufactured handcrafted silver rings.\u003cbr\u003e\u003cbr\u003eTo take full advantage of all the performance-enhancing sonic properties of the Børresen M-series, all other metal parts of these premium speakers also undergo cryogenic treatment. This reduces their inductance by a further 6-8%. The result is complete musical purity. With their unadulterated authenticity of music reproduction, these premium speakers set a new and unmatched standard – clarity, refinement, and imaging at its absolute best.\u003c\/p\u003e\n\u003ch3\u003eCryogenically treated for a tremendous improvement\u003c\/h3\u003e\n\u003cp\u003eCryogenic treatment of all metal parts of the speaker results in a further significant improvement in conductivity – thereby releasing the finest and most subtle musical details. When metal parts undergo cryogenic treatment, they are exposed to extreme cooling. In the wake of this process, the metal structure contracts more and more. Alloying elements are pushed out of the grain structure of the metal, which now becomes much more like a monocrystal. These structural changes in the metal have a profound effect on its sonic properties, resulting in an increase in conductivity of 6-8%.\u003cbr\u003e\u003cbr\u003eAll metal parts of these speaker series undergo cryogenic treatment. The cryogenic treatment cycle requires a time window of 3 days. During the first 24 hours, the metal undergoes a cooling process from room temperature to cryogenic temperatures. During the next 24 hours, the metal parts are kept at temperatures around -196°C (-321°F) before the temperature, over the following 24 hours, gradually returns to room temperature. The gradual cooling and heating are crucial to avoid thermal stress. The process strengthens and compresses the grain structure of the metal parts and reduces the inherent residual stress that occurs when metal solidifies from its liquid phase to a solid phase.\u003c\/p\u003e\n\u003ch3\u003eBørresen tweeter with extraordinary efficiency\u003c\/h3\u003e\n\u003cp\u003eElaborate finite element methods have been used to linearize and optimize the magnetic flux field in order to facilitate driver movement and ensure high efficiency and exceptional linearity.\u003cbr\u003e\u003cbr\u003eThe efficiency of this closed ribbon tweeter amounts to an extraordinary 94dB and operates from approximately 2.5 kHz and upward. The moving mass is extremely low at 0.01 grams. The fully concealed tweeter has the capacity to operate at incredible speed, which is an absolute prerequisite for unlocking the most subtle and refined sound details from any kind of music. The enormous robustness of this tweeter allows it to handle extremely high transient peaks without any ear-fatiguing interruptions. No transformers are used.\u003c\/p\u003e\n\u003ch3\u003eSeries connection for a coherent system\u003c\/h3\u003e\n\u003cp\u003eBørresen speakers are equipped with a series-connection configuration. The reason for this is that drivers share the same electric current in the crossover region. As a result, the electric current is phase-locked across the crossover region. Unlike standard parallel filtering, where each driver receives its own frequency and phase content, the new series filters work by redirecting out-of-band currents around the existing currents, creating a much more coherent system. This unmatched and innovative technological approach takes your music to a new echelon of acoustic delight.\u003cbr\u003e\u003cbr\u003eFor the crossover filter, Børresen has also gone to great lengths to find the best and most sophisticated state-of-the-art components. The coils are foil types wound with paper insulation and impregnated with resin under vacuum to make them mechanically extremely solid and stable.\u003cbr\u003e\u003cbr\u003eFor crossover capacitors, several rows of small military-spec stacked foil types have been used. They have the best mechanical stability and the lowest induction of any type of capacitor on the market (and they sound wonderful too). For tweeter attenuation resistors, metal strip types are used, as they have by far the lowest noise figures and additionally very low thermal variation.\u003c\/p\u003e\n\u003ch3\u003eA redesigned and reinforced cabinet\u003c\/h3\u003e\n\u003cp\u003eThe design is an evolution and optimization of Børresen’s fantastic 0-series cabinet. To ensure even higher performance, the M6 cabinet is constructed with an additional 5 mm of reinforced, block-milled, pressed wood structures. In addition, braces are built into the sides of the speaker to provide the cabinet with even more rigidity and mechanical stability. The tweeter and bass sections are equipped with matched terminals to ensure the highest efficiency. The cabinet is finished in black piano lacquer.\u003c\/p\u003e\n\u003ch3\u003eInternal cabinet M – Improves balance\u003c\/h3\u003e\n\u003cp\u003eThe larger cabinet has also improved the ventilation behind the bass\/midrange nozzles. This results in less compression and thus a much faster and more agile speaker driver, which has a significantly positive impact on the overall soundstage. In addition, the bass is equipped with a bass reflex section inside the cabinet, ensuring a dynamic and harmonious balance between midrange and bass.\u003c\/p\u003e\n\u003ch3\u003eM6 driver configuration\u003c\/h3\u003e\n\u003cp\u003eM6 is equipped with 6 unique 4.5″ M-series drivers. The drivers are connected in series in pairs, so that two drivers function as a bass\/midrange and four drivers function as a bass unit. This approach ultimately results in increased speed, precision, and depth, enriching the speaker with far more musicality.\u003c\/p\u003e\n\u003ch3\u003eBi-amping\u003c\/h3\u003e\n\u003cp\u003eM6 offers the option of bi-amping, allowing you to drive the bass and midrange\/tweeter sections individually. This not only provides sufficient power to each section, but also results in a cleaner, more precise sound.\u003c\/p\u003e\n\u003cp\u003eThese speakers are designed with two types of bi-amping in mind. The first is speaker-crossover bi-amping. The frequency between the bass section and the midrange\/tweeter section is optimized in accordance with the M3 and M6 design, so it delivers the best performance.\u003c\/p\u003e\n\u003cp\u003eThe second option is active crossover bi-amping, where you can adjust the crossover frequency yourself. This type of crossover is the optimal solution for fine-tuning your speakers according to the acoustic properties of your listening room, allowing you to control the amount of bass and the balance between bass and midrange\/tweeter. To further improve your listening experience, Børresen’s sister company, Aavik Acoustics, has developed a high-end Analog Active Filter that works seamlessly with these new speaker models and delivers the ultimate in precision and clarity.\u003c\/p\u003e\n\u003ch3\u003eInternally wired with Ansuz Gold Signature\u003c\/h3\u003e\n\u003cp\u003eM6 is equipped with Ansuz Gold Signature cables, representing the pinnacle of audio cable technology. These cables ensure extremely clear, natural, and authentic sound reproduction, allowing you to hear every single nuance of your music.\u003c\/p\u003e\n\u003ch3\u003eThe Tesla Coil principle\u003c\/h3\u003e\n\u003cp\u003eBørresen M6 uses Tesla Coil technology, which eliminates noise and improves musical clarity. This advanced technology works by generating opposite voltages to neutralize noise, resulting in significantly improved sound reproduction.\u003c\/p\u003e\n\u003ch3\u003eActive Square Tesla Coils\u003c\/h3\u003e\n\u003cp\u003eWith active square Tesla coils integrated into the circuit boards, M6 achieves impressive noise reduction, ensuring cleaner and more precise sound reproduction.\u003c\/p\u003e\n\u003ch3\u003eAnalog Dither Technology 3rd Generation\u003c\/h3\u003e\n\u003cp\u003eThe third generation of Ansuz analog dither technology ensures an even greater improvement in sound quality by amplifying the musical signal and reducing background noise, providing an even more detailed and open sound experience.\u003c\/p\u003e\n\u003ch3\u003eAnti Aerial Resonance Coil Technology\u003c\/h3\u003e\n\u003cp\u003eM6 is equipped with Anti Aerial Resonance Coil Technology, which effectively eliminates airborne noise and ensures clean signal transmission without interference.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black Piano","offer_id":48038300877073,"sku":"48038300877073","price":3750000.0,"currency_code":"DKK","in_stock":true},{"title":"White Piano","offer_id":48038300909841,"sku":"48038300909841","price":3750000.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Boerresen-M6-Front-Skewed-Total.jpg?v=1706528223"},{"product_id":"borresen-x1","title":"Børresen X1 (on sale)","description":"\u003ch2\u003eBørresen X1 - High-end compact speaker with a big soundstage\u003c\/h2\u003e\n\u003cp\u003eBørresen X1 is a compact and exceptionally great-sounding speaker that gives you incredible value for money. With X1, you gain access to Børresen’s know-how, which they have developed through the creation of their exclusive M-, 0-, and Z-series. This has resulted in a woofer\/midrange driver with the innovative spread-tow carbon diaphragm, one of the world’s lightest ribbon tweeters, and the use of copper caps in the magnetic motor system. Combined with the droplet-shaped cabinet, which effectively eliminates internal standing sound waves, you get a level of sound quality that is groundbreaking for its class. The sound is harmonious and has a weight far greater than its physical size would initially suggest. Vocals are delivered with the utmost openness and richness of detail, making it an incredibly musical communicator.\u003c\/p\u003e\n\u003ch3\u003eTechnologies and components\u003c\/h3\u003e\n\u003cp\u003eBørresen X1 may indeed be an entry-level model in the Børresen family, but that should not fool you. Børresen’s entry level is still high-end hi-fi, and X1 represents a remarkable step forward in quality and performance in its price class. These speakers benefit from all the knowledge gained through the development of the M, 0, and Z-series. Components from these exclusive series have been incorporated into the Børresen X1 speakers, including the groundbreaking spread-tow carbon diaphragm, the highly acclaimed Børresen ribbon tweeter, and the use of copper caps in the magnetic motor system.\u003c\/p\u003e\n\u003ch3\u003eX1 series diaphragm – woofer\/midrange\u003c\/h3\u003e\n\u003cp\u003eThe groundbreaking diaphragm in the X1 series is designed with the goal of achieving maximum stiffness and minimal noise. To achieve this unmatched performance, all components were designed, developed, and assembled in-house. The X1 diaphragm consists of three layers laminated into a single unit: two layers of spread carbon fiber with a layer of aramid honeycomb spacers in between. This unique combination of materials gives the diaphragm its exceptional properties. Spread carbon fiber is shaped to provide optimal stiffness, reducing disruptive sound vibrations and resonances to unprecedented levels. Aramid honeycomb has the best stiffness-to-weight ratio in the vertical direction. The diaphragm’s flat response with regard to resonances makes it possible to create an extremely transparent speaker with a smaller magnetic motor system to optimize costs.\u003c\/p\u003e\n\u003ch3\u003eUnique magnetic motor system\u003c\/h3\u003e\n\u003cp\u003eIn the X1 series magnetic motor system, double copper caps are used on the pole ring to achieve high flux and low inductance. This technology has been borrowed from the Børresen Z-series. Copper helps reduce electromagnetic resonance by counteracting changes in flux, resulting in a flatter inductance curve and fewer peaks in the impedance curve. This reduced inductance places less strain on the amplifier. To ensure high efficiency, X1 is equipped with two pole rings, and any loss of flux is compensated for by a larger magnet.\u003c\/p\u003e\n\u003ch3\u003eUltra-light tweeter without distortion\u003c\/h3\u003e\n\u003cp\u003eThe tweeter in X1 uses the same basic design as in all other Børresen speaker series. However, a reduction in magnet and iron mass has been achieved thanks to the extremely efficient design. This results in only a slight reduction in efficiency, going from the remarkable 94 dB to 90 dB, which is still impressive efficiency for a tweeter. The tweeter operates from approx. 2.5 kHz and up. With an extremely low moving mass of just 0.01 grams, the tweeter can respond incredibly quickly. Its high robustness makes it possible to handle very sharp transients without causing damped tones.\u003c\/p\u003e\n\u003ch3\u003ePremium crossover parts from the Z-series\u003c\/h3\u003e\n\u003cp\u003eBørresen X1 is equipped with a parallel crossover that uses the same premium components as the Z-series. This results in a very mechanically stable crossover that minimizes self-resonance.\u003c\/p\u003e\n\u003ch3\u003eX1 series cabinet\u003c\/h3\u003e\n\u003cp\u003eThe cabinet surface is elegantly finished in black piano lacquer and reinforced with carbon fiber inserts. The cabinet is made from a heavily reinforced wood composite that eliminates sound distortion and reduces mechanical influences, including hysteresis. This construction provides superior sound reproduction. The X1 series is equipped with bass reflex ports, and the tweeter is vented to compensate for building air pressure. The bass section contains tuned ports calibrated to musically relevant frequencies.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBørresen X1 combines these technological innovations and components to deliver a remarkable listening experience. The exceptional diaphragm, advanced magnetic motor, and high-performance tweeter ensure that music is reproduced with incredible clarity and precision. This speaker series offers exceptional quality and performance in its price class and is the ideal choice for audio enthusiasts seeking an affordable entry into the Børresen universe. Børresen X1 is not just speakers - it is your gateway to an outstanding musical experience.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black Piano \/ Without stand","offer_id":48090055835921,"sku":"48090055835921","price":30000.0,"currency_code":"DKK","in_stock":true},{"title":"Black Piano \/ With stand","offer_id":48195394634001,"sku":"48195394634001","price":37500.0,"currency_code":"DKK","in_stock":true},{"title":"White Piano \/ Without stand","offer_id":48090055868689,"sku":"48090055868689","price":30000.0,"currency_code":"DKK","in_stock":true},{"title":"White Piano \/ With stand","offer_id":48195394666769,"sku":"48195394666769","price":37500.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Boerresen-X1-Black-One-Speaker-Front-Skewed-Total.jpg?v=1720814003"},{"product_id":"borresen-c3","title":"Børresen C3","description":"\u003ch2\u003eBØRRESEN C3 – AN EXTRAORDINARY FLOORSTANDING SPEAKER WITH INNOVATIVE TECHNOLOGY\u003c\/h2\u003e\n\u003cp\u003eBørresen C3 is a masterpiece of audio technology, designed to exceed the expectations of even the most discerning audiophiles. As the flagship model in the C series, the C3 offers an extended frequency response from 25 Hz to 50 kHz and two Børresen DCC5 Neo midrange drivers that take midrange detail to new heights. With a combination of advanced engineering and aesthetic elegance, the C3 delivers an incredibly engaging listening experience that both impresses and inspires.\u003c\/p\u003e\n\u003cp\u003eEquipped with Børresen’s patented RP94 ribbon tweeter, two advanced DCC5 Neo midrange drivers, and two DCC5 Neo woofers, the C3 is created to reproduce music with exceptional precision, clarity, and depth. The cabinet’s sophisticated carbon fiber-reinforced design ensures perfect acoustic balance and a look that is just as impressive as the speaker’s performance.\u003c\/p\u003e\n\u003ch3\u003eHIGHLIGHTS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Børresen RP94 ribbon tweeter with a moving mass of only 0.01 grams for sublime detail reproduction.\u003c\/li\u003e\n\u003cli\u003eTwo DCC5 Neo midrange drivers with spread-tow carbon fiber diaphragms for unmatched precision.\u003c\/li\u003e\n\u003cli\u003eTwo DCC5 Neo woofers for powerful and dynamic bass reproduction.\u003c\/li\u003e\n\u003cli\u003eFrequency response from 25 Hz to 50 kHz for deeper bass and better dynamics.\u003c\/li\u003e\n\u003cli\u003eSeries crossover for perfect phase correction and harmonious integration between the drivers.\u003c\/li\u003e\n\u003cli\u003eCarbon fiber-reinforced cabinet for minimal resonance and maximum acoustic performance.\u003c\/li\u003e\n\u003cli\u003eAnsuz Darkz S2t feet with titanium balls for optimal mechanical isolation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBØRRESEN RP94 RIBBON TWEETER – EXCEPTIONAL CLARITY\u003c\/h3\u003e\n\u003cp\u003eThe patented RP94 ribbon tweeter is a cornerstone of Børresen speakers. With a moving mass of only 0.01 grams and an efficiency of 94 dB, the tweeter reproduces even the finest details in the music. It is designed to handle high sound pressure levels without distortion and ensures a silky-smooth yet incredibly detailed sound experience. The linear and ventilated design ensures that the tweeter can deliver high-frequency precision up to 50 kHz.\u003c\/p\u003e\n\u003ch3\u003eDCC5 NEO MIDRANGE DRIVERS – PRECISION AND DETAIL\u003c\/h3\u003e\n\u003cp\u003eThe C3’s two DCC5 Neo midrange drivers are developed with Børresen’s innovative diaphragm technology, consisting of two layers of spread-tow carbon fiber and a honeycomb core in the middle. This unique construction provides an unusual combination of low mass and high stiffness, reducing resonances and ensuring clean, precise reproduction of the midrange.\u003c\/p\u003e\n\u003cp\u003eThe midrange drivers handle the complex midrange band with a silky-smooth transition to the tweeter and woofers. The result is crystal-clear and harmonious sound, where vocals and instruments appear vivid and natural.\u003c\/p\u003e\n\u003ch3\u003eDCC5 NEO WOOFERS – POWER AND DEPTH\u003c\/h3\u003e\n\u003cp\u003eThe two DCC5 Neo woofers in the C3 are designed to deliver powerful and precise bass reproduction. With the same advanced diaphragm construction as the midrange drivers, the woofers are optimized to handle the deepest frequencies with impressive power and control. The combination of carbon fiber’s stiffness and the lightweight construction ensures a dynamic response, even at high volume levels.\u003c\/p\u003e\n\u003cp\u003eThe precision in the bass range provides a solid and full-bodied foundation that both supports and complements the higher frequencies. Whether you listen to orchestral music or deep electronic bass, the C3 delivers a convincing and dynamic bass experience.\u003c\/p\u003e\n\u003ch3\u003eSERIES CROSSOVER – PERFECT INTEGRATION\u003c\/h3\u003e\n\u003cp\u003eBørresen C3 uses a series crossover network that ensures perfect integration between all drivers. This advanced technology eliminates phase shifts and ensures harmonious balance across the entire frequency spectrum. The music appears as a coherent whole, where every note and nuance is reproduced with naturalness and clarity.\u003c\/p\u003e\n\u003ch3\u003eDESIGN AND CONSTRUCTION – FUNCTION AND AESTHETICS\u003c\/h3\u003e\n\u003cp\u003eThe C3’s cabinet is built from a robust wood composite and reinforced with 1 mm carbon fiber panels that eliminate resonance and distortion. The elegant glossy black or white finish gives the speaker a timeless and exclusive look. With Ansuz Darkz S2t feet that use titanium balls, optimal mechanical isolation is ensured, contributing to cleaner sound reproduction.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black High Gloss","offer_id":50335875105041,"sku":"50335875105041","price":262500.0,"currency_code":"DKK","in_stock":true},{"title":"White High Gloss","offer_id":50335875137809,"sku":"50335875137809","price":262500.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Borresen-C3-White-Speaker-Front-Skewed.jpg?v=1726669492"},{"product_id":"borresen-c2","title":"Børresen C2","description":"\u003ch2\u003eBØRRESEN C2 – GROUNDBREAKING AUDIO TECHNOLOGY AND EXCLUSIVE DESIGN\u003c\/h2\u003e\n\u003cp\u003eBørresen C2 is a masterful example of modern acoustic engineering and design. This high-end floorstanding speaker combines advanced materials, innovative technologies, and refined aesthetics to deliver an unmatched listening experience. With its carefully engineered cabinet structure, revolutionary DCC5 Neo driver technology, and ultra-light Børresen RP94 ribbon tweeter, the C2 represents a new standard in sound quality and precision.\u003c\/p\u003e\n\u003cp\u003eWith a frequency response from 35 Hz to 50 kHz and a sensitivity of 88 dB, the C2 offers dynamic and detailed reproduction that immerses you in the music. The elegant design with glossy black and white carbon-fiber side panels makes the C2 a visual masterpiece that can be integrated into any exclusive interior.\u003c\/p\u003e\n\u003ch3\u003eHIGHLIGHTS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBørresen DCC5 Neo driver with a unique diaphragm construction for reduced resonance and maximum stiffness.\u003c\/li\u003e\n\u003cli\u003eBørresen RP94 ribbon tweeter with an efficiency of 94 dB and a moving mass of only 0.01 grams.\u003c\/li\u003e\n\u003cli\u003e2 x DCC5 Neo woofers that ensure deep, powerful, and precise bass reproduction.\u003c\/li\u003e\n\u003cli\u003eSerial crossover for more phase-accurate and coherent sound.\u003c\/li\u003e\n\u003cli\u003eExclusive cabinet design with carbon-fiber panels for minimal resonance and maximum sound quality.\u003c\/li\u003e\n\u003cli\u003eAnsuz Darkz S2t feet with titanium balls for optimal mechanical grounding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eREVOLUTIONARY DCC5 NEO DRIVERS – PRECISION AND CONTROL\u003c\/h3\u003e\n\u003cp\u003eBørresen’s unique DCC5 Neo drivers are built with a diaphragm that combines three layers: two layers of spread-tow carbon fiber and a honeycomb-structure core. This construction ensures maximum stiffness and reduces resonances to a minimum, eliminating unwanted vibrations and providing incredibly clean sound reproduction.\u003c\/p\u003e\n\u003cp\u003eUsing a magnet motor with dual copper caps and N52 neodymium magnets, these drivers achieve a perfect balance between high flux and low inductance. This reduces electromagnetic distortion and eases the load on the amplifier, ensuring more dynamic and precise music reproduction.\u003c\/p\u003e\n\u003ch3\u003eBØRRESEN RP94 TWEETER – ULTRA-FAST AND DETAILED\u003c\/h3\u003e\n\u003cp\u003eThe advanced Børresen RP94 ribbon tweeter has a moving mass of only 0.01 grams, making it extremely fast and responsive. With an efficiency of 94 dB, this tweeter reproduces the finest musical details with clarity and precision that are exceptional. The tweeter’s ability to handle high transients without distortion makes it ideal for both complex musical passages and dynamic movie scenes.\u003c\/p\u003e\n\u003cp\u003eThe fully vented design and optimized magnetic flux ensure excellent linearity and efficiency, contributing to a natural and harmonious listening experience.\u003c\/p\u003e\n\u003ch3\u003eSERIAL CROSSOVER – PHASE-ACCURATE SOUND\u003c\/h3\u003e\n\u003cp\u003eThe C2 uses a serial crossover that ensures phase-accurate power distribution to each transducer in the critical filtered frequency ranges. This advanced solution is significantly more complex to implement, but it provides coherent and natural sound reproduction. The result is a balanced soundstage with incredible precision and realism.\u003c\/p\u003e\n\u003ch3\u003eEXCLUSIVE CABINET DESIGN – FUNCTION AND AESTHETICS IN HARMONY\u003c\/h3\u003e\n\u003cp\u003eThe cabinet of the Børresen C2 is made from a robust wood composite with internal bracing that eliminates resonances and standing waves. The 1 mm thick carbon-fiber side panels increase stiffness and reduce mechanical influence. This construction ensures clean and undisturbed sound, even at high sound pressure levels.\u003c\/p\u003e\n\u003cp\u003eThe glossy black and white side panels combine aesthetics and functionality, giving the speaker an exclusive and timeless design that stands out in any room.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black High Gloss","offer_id":50335886442769,"sku":"50335886442769","price":187500.0,"currency_code":"DKK","in_stock":true},{"title":"White High Gloss","offer_id":50335886475537,"sku":"50335886475537","price":187500.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/BC02_WHITE_FRONT_WIDE_NoBg.jpg?v=1737371483"},{"product_id":"borresen-c1","title":"Børresen C1 incl. stand","description":"\u003ch2\u003eBørresen C1 – Exclusive high-end compact speaker with innovative technology and superior sound\u003c\/h2\u003e\n\u003cp\u003eBørresen C1 is a unique and exclusive stand-mounted high-end speaker that combines cutting-edge technology with elegant design. For the first time ever, Børresen introduces its advanced technologies in a compact speaker, resulting in a sound experience out of the ordinary. The C1 is the answer to the dreams of many hi-fi enthusiasts around the world, and it has absolutely been worth the wait.\u003c\/p\u003e\n\u003cp\u003eDespite its compact size, it manages to fill the room with a musical presence normally experienced only with much larger speakers. The sound from the Børresen C1 is exceptionally detailed, dynamic, and full-bodied. The bass and midrange are reproduced with a precision and depth that are nothing short of unmatched.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced Børresen DCC5 NEO bass\/midrange driver for superior clarity and dynamics\u003c\/li\u003e\n\u003cli\u003eUnique diaphragm construction with spread-tow carbon fiber and honeycomb for optimal rigidity\u003c\/li\u003e\n\u003cli\u003eSophisticated magnetic motor system with dual copper caps that reduce electromagnetic resonance\u003c\/li\u003e\n\u003cli\u003eBørresen RP94 ribbon tweeter with ultralight diaphragm for exceptional precision and speed\u003c\/li\u003e\n\u003cli\u003eSeries crossover network for coherent and natural sound reproduction\u003c\/li\u003e\n\u003cli\u003eRobust cabinet design with carbon fiber panels for minimal distortion\u003c\/li\u003e\n\u003cli\u003eIncluding C1 speaker stand with Ansuz Darkz S2t Resonance Control for optimal sound quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvanced DCC5 NEO bass\/midrange driver\u003c\/h3\u003e\n\u003cp\u003eAt the heart of the C1's impressive performance is the specially developed 5-inch Børresen DCC5 NEO bass\/midrange driver. This unit is precision-engineered to deliver superior clarity and dynamics in the midrange and bass frequencies. The diaphragm consists of an innovative three-layer construction: two layers of spread-tow carbon fiber with a honeycomb structure in between. This unique design provides optimal rigidity and reduces unwanted vibrations and resonances. The result is incredibly clean and natural sound reproduction that lets you experience the music exactly as the artist intended.\u003c\/p\u003e\n\u003ch3\u003eInnovative magnetic motor system\u003c\/h3\u003e\n\u003cp\u003eThe C1 is equipped with a sophisticated magnetic motor system with dual copper caps on the pole rings. This advanced technology minimizes electromagnetic resonance and reduces inductance. That means less strain on your amplifier and more efficient, precise control over the driver's movements. This leads to more detailed and distortion-free sound that brings you even closer to the music.\u003c\/p\u003e\n\u003ch3\u003eBørresen RP94 ribbon tweeter – Speed and precision\u003c\/h3\u003e\n\u003cp\u003eOne of the most striking features of the C1 is the renowned Børresen RP94 ribbon tweeter. With an ultralight moving mass of only 0.01 grams and an impressive efficiency of 94 dB, this tweeter delivers outstanding reproduction of the highest frequencies. It captures even the finest details and nuances in the music and handles strong transients without any sign of distortion. This ensures a crystal-clear and nuanced listening experience, where every instrument and every vocal stands out clearly in the soundstage.\u003c\/p\u003e\n\u003ch3\u003eSeries crossover – Harmonious and natural sound reproduction\u003c\/h3\u003e\n\u003cp\u003eTo achieve coherent and natural sound, the C1 uses a series crossover network. Although this crossover design is more complex to implement, it provides harmonious integration of the frequencies by ensuring phase-correct current flow to the speaker's drivers. This results in a more authentic and engaging listening experience, where the music flows freely and undisturbed across the entire frequency spectrum.\u003c\/p\u003e\n\u003ch3\u003eRobust cabinet with exclusive materials\u003c\/h3\u003e\n\u003cp\u003eThe cabinets of the C1 are made from internally reinforced wood composite material, designed to minimize standing waves, sound distortion, and external resonances. By combining this with 1 mm thick carbon fiber panels on the sides, the cabinet's rigidity is significantly increased. The glossy white or black side panels give the speaker an elegant and modern look that fits perfectly into any stylish home. This construction ensures that you get precise and undisturbed sound reproduction, no matter what volume you listen at.\u003c\/p\u003e\n\u003ch3\u003eC1 speaker stand – Synergy between speaker and stand\u003c\/h3\u003e\n\u003cp\u003eTo ensure the optimal listening experience, the C1 is designed to stand on the specially developed C1 stand. The stand is made from the same robust wood composite material as the speaker, creating perfect synergy between the two. The absence of iron components eliminates the risk of magnetic interference with the crossover network, contributing to cleaner sound. The stand is also equipped with Ansuz Darkz S2t Resonance Control units, which effectively reduce vibrations and further improve sound quality. For those who want to optimize even further, it is possible to upgrade with additional Darkz units.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Black High Gloss","offer_id":50335930646801,"sku":"50335930646801","price":112500.0,"currency_code":"DKK","in_stock":true},{"title":"White High Gloss","offer_id":50335930679569,"sku":"50335930679569","price":112500.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Borresen-C1-Black-Speaker-Front-Skrewed.jpg?v=1729172251"},{"product_id":"borresen-t1-silver-supreme-edition","title":"Børresen T1 Silver Supreme Edition","description":"\u003ch2\u003eBØRRESEN T1 SILVER SUPREME EDITION  \u003c\/h2\u003e\n\u003cp\u003eWith its Silver Supreme Edition speaker, Børresen ensures a transparent and authentic musical performance. The aesthetic design of the cabinet and stand makes the speaker appear as a work of art in itself. The Silver Supreme version is the flagship among Børresen’s models. \u003c\/p\u003e\n\u003ch3\u003eHIGHLIGHTS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eFrequency range 50Hz - 50KHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eSensitivity 86 dB \/ 1W\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eImpedance 6 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eRecommended amplifier \u003cmeta charset=\"utf-8\"\u003e\u0026gt;50W\u003c\/li\u003e\n\u003cli\u003eCryogenic treatment\u003cspan\u003e \u003c\/span\u003e✓\u003c\/li\u003e\n\u003cli\u003e1 x Tweeter \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eBørresen RP94 Ribbon Planar Tweeter\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan class=\"is-style-normal\"\u003eBass\/Midrange \u003c\/span\u003e\u003cspan class=\"is-style-normal\"\u003e5\" Børresen IronFree5 driver\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e\u003cspan class=\"is-style-normal\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"is-style-normal\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cspan class=\"is-style-normal\"\u003eTECHNOLOGY AND DESIGN\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eBørresen has replaced the copper rings in the speaker with handmade silver rings, specially designed by Børresen itself. This significantly reduces inductance. Inductance in Børresen speakers is already approximately 10 times lower than in conventional models, but in the Silver Supreme Edition it is as much as 12 times lower. \u003c\/span\u003e\u003cspan\u003eAll metal components undergo cryogenic treatment, which further reduces inductance by 6-8%. The result is a pure, clear, and refined soundstage, placing the Silver Supreme Edition firmly in the absolute high-end class and setting a completely new standard.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eCRYOGENIC TREATMENT ENSURES PURE SOUND\u003c\/h3\u003e\n\u003cp\u003eBørresen uses cryogenic treatment on all metal parts of the speaker to ensure a further significant improvement in conductivity. When metal parts undergo cryogenic treatment, they are exposed to extreme cooling. In this process, the metal structure contracts more and more. Alloying elements are pushed out of the grain structure of the metal, which now becomes very similar to a monocrystal. The result is that the metal component becomes stronger, the internal stress during solidification from liquid to solid form is reduced, and conductivity is increased.\u003cbr\u003e\u003cbr\u003eAll metal parts in these speaker series undergo cryogenic treatment. The cryogenic treatment cycle requires a time window of 3 days. Within the first 24 hours, the metal undergoes a cooling process from room temperature to cryogenic temperatures. During the next 24 hours, the metal parts are kept at temperatures around -196°C (-321°F) before the temperature, within the following 24 hours, gradually returns to room temperature. The gradual cooling and heating are crucial to avoid thermal stress. The process strengthens and compresses the grain structure of the metal parts and reduces the inherent residual stress that occurs when metal solidifies from its liquid phase to a solid phase.\u003c\/p\u003e\n\u003ch3\u003eBass\/midrange diaphragm\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe diaphragm is designed to achieve maximum rigidity with minimal noise. In the Silver Supreme Edition, the diaphragm consists of two layers of very thin carbon on both sides of a 4 mm Nomex honeycomb core. This composite structure is the same as the one used in Formula 1 race cars. It provides the ultimate combination of rigidity and weight ratio. The exceptionally low weight of only 5.5 grams enables a very high acceleration factor in the driver, resulting in both outstanding resolution and higher efficiency.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"667\" data-start=\"0\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eO-series crossover\u003c\/h3\u003e\n\u003cp data-end=\"667\" data-start=\"0\"\u003eThe Børresen Silver Supreme Edition speakers are equipped with a series crossover configuration, which means that the drivers share the same electrical current in the crossover region. The electrical signals going to the speakers are therefore \"phase-locked.\" This creates a more coherent and harmonious sound experience. In standard parallel filtering, each driver receives its own frequency and phase content. The Børresen approach reduces signal distortion and improves the overall coherence of the sound, leaving you with an \u003cmeta charset=\"utf-8\"\u003eacoustic pleasure.\u003c\/p\u003e\n\u003cp data-end=\"942\" data-start=\"669\"\u003eFor the crossover filter, we have made a major effort to source the best and most sophisticated components of the highest quality. The coils for the crossover filter are foil types, wound with paper insulation and impregnated with resin under vacuum to make them mechanically extremely solid and stable.\u003c\/p\u003e\n\u003cp data-end=\"1160\" data-start=\"944\"\u003eFor the crossover capacitors, Børresen uses arrays of small military-spec stack-foil types. They have the best mechanical stability and the lowest induction of all types of capacitors on the market (and they sound fantastic, too). For tweeter attenuation resistors, they use metal-strip types, as they have by far the lowest noise values and, in addition, very low thermal variation.\u003c\/p\u003e\n\u003ch3\u003eThe cabinet\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eBørresen speaker cabinets are built with heavy bracing and compressed wood, beautifully veneered in walnut and fitted with solid walnut inserts. The cabinets combine the finest Danish furniture design tradition with stylish shapes, originally created by the late Franco Serblin of Sonus Faber. The tweeter section is vented to balance air pressure, while the bass sections are equipped with tuned ports calibrated to musically relevant frequencies.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cmeta charset=\"utf-8\"\u003eAnsuz Darkz for better decoupling\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eAnsuz Darkz decouplers are designed to ensure significantly better mechanical decoupling of the speaker cabinet from the stand and the floor. Ansuz Darkz consists of three discs separated by three titanium ball bearings. They are available in four different alloys, providing different levels of resonance control depending on the desired sonic result. There are three holes in the surface of the stand’s top plate, which contain the built-in Darkz resonance-control decouplers between the speaker and the plate. The stand’s feet are designed to rest on individual Darkz decouplers, which can be selected as needed.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cmeta charset=\"utf-8\"\u003eThe Tesla coil principle\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe Tesla coil principle is based on the use of two coils wound in opposite directions – one coil and one counter-coil. When the Tesla coil encounters a voltage peak, a counter-spike is activated to eliminate the noise. This method is effective because noise spikes carry only pure voltage and almost no charge, making the interruption of the noise highly effective. By adding multiple P-TC coils in parallel, efficiency increases, and the perceived \"blackness\" in the music is significantly improved. Ansuz Tesla coils are available in different types and complement each other in terms of strengths and weaknesses.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cmeta charset=\"utf-8\"\u003eAnti-airborne resonance coil technology\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eAll cables and cable trims act as antennas for airborne RF noise, which can be a major problem. The passive Tesla coil is wound around the outer part of the cable and protects the signal from absorbing this RF noise. This noise is absorbed in the Tesla coil, and noise peaks are effectively eliminated. When current runs through the conductor and it is wound in the opposite direction, it is used as a counter-coil, and the RF noise is then eliminated.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Børresen","offers":[{"title":"T1 Silver Supreme Edition \/ Black High Gloss","offer_id":55215850815864,"sku":"55215708176760","price":375000.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/SILVER_1_WHITE.jpg?v=1753356042"},{"product_id":"borresen-t3-silver-supreme-edition","title":"Børresen T3 Silver Supreme Edition","description":"\u003ch2\u003eBørresen T3 Silver Supreme Edition\u003c\/h2\u003e\n\u003cp\u003eWith its Silver Supreme Edition speaker, Børresen delivers a transparent and authentic musical performance. The aesthetic design of the cabinet and stand makes the speaker appear as a work of art in itself. The Silver Supreme version is the flagship among Børresen’s models. \u003c\/p\u003e\n\u003ch3\u003eHIGHLIGHTS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range 30Hz - 50KHz\u003c\/li\u003e\n\u003cli\u003eSensitivity 86 dB \/ 1W\u003c\/li\u003e\n\u003cli\u003eImpedance 6 ohms\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier\u003cspan\u003e \u003c\/span\u003e\u0026gt;50W\u003c\/li\u003e\n\u003cli\u003eCryogenic treatment\u003cspan\u003e \u003c\/span\u003e✓\u003c\/li\u003e\n\u003cli\u003e1 x Tweeter \u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eBørresen RP94 Ribbon Planar Tweeter\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan class=\"is-style-normal\"\u003eBass\/Midrange \u003c\/span\u003e\u003cspan class=\"is-style-normal\"\u003e5\" Børresen IronFree5 driver\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan\u003e\u003cspan class=\"is-style-normal\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"is-style-normal\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cmeta charset=\"utf-8\"\u003eBørresen IronFree5 Titanium SSE driver\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp data-start=\"0\" data-end=\"199\"\u003eBørresen has equipped the Silver Supreme Edition of the T-series speakers with 5” drivers featuring titanium baskets. This material provides both high strength and effective damping properties. Using computer-optimized FEM calculations, Børresen has 3D-optimized the shape of the baskets. This ensures that the baskets do not impede the airflow from the diaphragm’s rearward movement. The result is that the baskets remain acoustically invisible and contribute to a cleaner sound experience.\u003c\/p\u003e\n\u003ch3\u003ePATENTED IRONLESS MAGNET MOTOR \u003c\/h3\u003e\n\u003cp data-end=\"199\" data-start=\"0\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eBørresen has replaced the copper rings in the speaker with handmade silver rings, specially designed by Børresen itself. This significantly reduces inductance. Even before that, the inductance in Børresen speakers is about 10 times lower than in conventional models, but in the Silver Supreme Edition it is as much as 12 times lower. \u003c\/span\u003e\u003cspan\u003eAll metal components undergo cryogenic treatment, which further reduces inductance by 6–8%. The result is a pure, clear, and refined soundstage that places the Silver Supreme Edition firmly in the absolute high-end class and sets an entirely new standard.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"199\" data-start=\"0\"\u003e\u003cspan\u003eT-series diaphragm\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"0\" data-end=\"228\"\u003eBørresen has developed a diaphragm consisting of three layers laminated into one unified structure. An aramid honeycomb core sits between two layers of spread-tow carbon fiber. This combination creates a moving surface with exceptional properties. The carbon fiber layers ensure high stiffness in multiple directions. The aramid core has impressive vertical stiffness relative to its weight. Børresen has also added graphene and boron whiskers to the epoxy that bonds the layers together. This strengthens the bonds between the carbon fibers and makes the entire diaphragm stronger and more stable—without adding weight. The result is a very lightweight, yet stiff and low-noise diaphragm.\u003c\/p\u003e\n\u003ch3 data-start=\"0\" data-end=\"228\"\u003eCryogenic treatment for an optimal soundstage\u003c\/h3\u003e\n\u003cp data-start=\"0\" data-end=\"228\"\u003e\u003cmeta charset=\"utf-8\"\u003eBørresen uses cryogenic treatment for all metal parts of the speaker to ensure a further significant improvement in conductivity. When metal parts undergo cryogenic treatment, they are exposed to extreme cooling. In this process, the metal structure contracts more and more. Alloying elements are pushed out of the grain structure of the metal, which then becomes much more like a monocrystal. The result is that the metal component becomes stronger, internal stress during solidification from liquid to solid form is reduced, and conductivity is increased.\u003c\/p\u003e\n\u003ch3 data-start=\"0\" data-end=\"228\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eBørresen tweeter\u003c\/h3\u003e\n\u003cp data-end=\"371\" data-start=\"191\"\u003eBørresen has used advanced FEM calculations to make the magnetic field more linear and efficient. This gives the driver easier movement, high efficiency, and precise reproduction. The tweeter has an efficiency of no less than 94 dB and plays from approximately 2.5 kHz and up. The moving mass weighs only 0.01 grams, making the tweeter extremely fast. This is crucial for reproducing even the finest details in the music. The tweeter is built to withstand very high levels without distortion. It can handle powerful transients without causing listening fatigue. Børresen has completely avoided the use of transformers in the design.\u003c\/p\u003e\n\u003ch3 class=\"is-style-size-52\"\u003e\u003cstrong\u003eCrossover - unique and technically advanced solution\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"358\" data-start=\"137\"\u003eBørresen speakers are equipped with series crossovers. This means that the drivers share the same electrical current in the crossover region. As a result, the current remains phase-locked when the signal shifts between the drivers. Unlike common parallel crossovers, where each driver receives its own frequency and phase signal, the series crossovers route signals outside the operating range around the drivers. This creates a far more coherent system. This unique and technically advanced solution elevates the music experience to a new level.\u003c\/p\u003e\n\u003cp data-end=\"886\" data-start=\"667\"\u003eFor the crossover, Børresen has selected some of the most advanced components on the market. The coils are foil-type, wound with paper insulation and vacuum-impregnated with epoxy resin. This gives them very high mechanical stability. The capacitors are built from small military-spec stack-foil types. They offer the best mechanical stability and the lowest inductance on the market—and they sound fantastic. For tweeter attenuation, Børresen uses resistors with metal strips. They have a significantly lower noise level than other types and change only minimally with temperature variations.\u003c\/p\u003e\n\u003ch3 data-start=\"0\" data-end=\"228\"\u003eAdvanced cabinet design for maximum performance \u003c\/h3\u003e\n\u003cp data-start=\"0\" data-end=\"171\"\u003eThe Børresen T-series combines high-gloss lacquer with real wood veneer. Solid wood bracing, milled from blocks, and carbon-fiber reinforcements increase both rigidity and airflow. A rear-facing venting system ensures that the drivers can release pressure efficiently. This reduces distortion and the build-up of excess pressure in the cabinet. The cabinet construction is carefully thought out and delivers an open, spacious, and dynamic sound. At the same time, the speaker has a modern and elegant look—and takes up minimal space in the room.\u003c\/p\u003e\n\u003ch3 data-start=\"0\" data-end=\"171\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eAnsuz Gold Signature - \u003c\/span\u003eThe most advanced cables\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eAnsuz Gold Signature cables pave the way for pure, authentic sound reproduction. This is the most innovative and advanced audio cable technology on the market.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eTesla Coil principle\u003c\/h3\u003e\n\u003cp\u003eBørresen T3 Silver Supreme Edition uses Tesla Coil technology that eliminates noise and improves musical clarity. This advanced technology works by generating opposite voltages to neutralize noise, resulting in significantly improved sound reproduction.\u003c\/p\u003e\n\u003ch3\u003eActive Square Tesla Coils\u003c\/h3\u003e\n\u003cp\u003eWith active square Tesla coils integrated into the circuit boards, \u003cmeta charset=\"utf-8\"\u003eT3 Silver Supreme Edition achieves impressive noise reduction, ensuring cleaner and more precise sound reproduction.\u003c\/p\u003e\n\u003ch3\u003eAnalog Dither Technology 3rd Generation\u003c\/h3\u003e\n\u003cp\u003eThe third generation of Ansuz analog dither technology ensures an even greater improvement in sound quality by amplifying the musical signal and reducing background noise, providing an even more detailed and open sound experience.\u003c\/p\u003e\n\u003ch3\u003eAnti Aerial Resonance Coil Technology\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eBørresen T3 Silver Supreme Edition is equipped with Anti Aerial Resonance Coil Technology, which effectively eliminates airborne noise and ensures clean signal transmission without interference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Børresen","offers":[{"title":"T3 Silver Supreme Edition \/ Black High Gloss","offer_id":55216549396856,"sku":"55215884632440","price":746457.0,"currency_code":"DKK","in_stock":true},{"title":"T3 Silver Supreme Edition \/ Real Wood Walnut","offer_id":55216549429624,"sku":"55215884632441","price":746457.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Silver_3_white_c2c8f465-a393-4d15-8edc-dcb22b43f7d5.jpg?v=1753366225"},{"product_id":"t5-silver-supreme-edition","title":"T5 Silver Supreme Edition","description":"\u003ch2 data-section-id=\"ni5e5q\" data-start=\"127\" data-end=\"155\"\u003eT5 Silver Supreme Edition - When only the best is good enough\u003c\/h2\u003e\n\u003cp data-start=\"162\" data-end=\"343\"\u003eThere are speakers – and then there are experiences.\u003cbr data-start=\"214\" data-end=\"217\"\u003eThe T5 Silver Supreme Edition from Børresen is created for those who refuse to compromise on sound, materials, or craftsmanship.\u003c\/p\u003e\n\u003cp data-start=\"345\" data-end=\"637\"\u003eInspired by the uncompromising M series, the T series carries forward Børresen's most advanced technologies in a more refined and accessible form. The result is a speaker that delivers exceptional precision, depth, and musicality – wrapped in a design that radiates calm, strength, and exclusivity.\u003c\/p\u003e\n\u003ch3 data-section-id=\"10btkw6\" data-start=\"378\" data-end=\"391\"\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"393\" data-end=\"518\"\u003eFrequency range: 25 Hz – 50 kHz\u003c\/li\u003e\n\u003cli data-start=\"393\" data-end=\"518\"\u003eSensitivity: 88 dB \/ 1W\u003c\/li\u003e\n\u003cli data-start=\"393\" data-end=\"518\"\u003eImpedance: 6 ohm\u003c\/li\u003e\n\u003cli data-start=\"393\" data-end=\"518\"\u003eRecommended amplifier: \u0026gt;50 W\u003c\/li\u003e\n\u003cli data-start=\"393\" data-end=\"518\"\u003eCryo treatment: ✓\u003c\/li\u003e\n\u003cli data-start=\"393\" data-end=\"518\"\u003e1 x Tweeter: Børresen RP94 Ribbon Planar Tweeter\u003c\/li\u003e\n\u003cli data-start=\"393\" data-end=\"518\"\u003e2 x Bass\/midrange: 5\" Børresen IronFree5 Titanium SSE driver\u003c\/li\u003e\n\u003cli data-start=\"393\" data-end=\"518\"\u003e4 x Bass: 8\" Børresen IronFree8 Titanium SSE driver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-section-id=\"166jzao\" data-start=\"960\" data-end=\"1002\"\u003eBass Reproduction Beyond the Ordinary\u003c\/h3\u003e\n\u003cp data-start=\"1004\" data-end=\"1220\"\u003eThe T5 Silver Supreme Edition is equipped with advanced 8” bass drivers, where every single detail has been carefully considered. The baskets are made of titanium – a material chosen for its extreme strength and superior damping properties.\u003c\/p\u003e\n\u003cp data-start=\"1222\" data-end=\"1423\"\u003eThrough extensive FEM optimization, the geometry has been fine-tuned so that airflow moves freely and without resistance. This means you experience bass that is deep, controlled, and completely effortless.\u003c\/p\u003e\n\u003cp data-start=\"1425\" data-end=\"1607\"\u003eThe diaphragm is inspired by the M series and created to deliver both power and speed. The result is reproduction that feels lively, natural, and effortless – regardless of musical genre.\u003c\/p\u003e\n\u003ch3 data-section-id=\"146sf6j\" data-start=\"1614\" data-end=\"1643\"\u003ePatented Magnet Technology\u003c\/h3\u003e\n\u003cp data-start=\"1645\" data-end=\"1818\"\u003eAt the core of the experience is Børresen's patented ironless magnet motor. Here, traditional materials have been replaced with handmade silver rings, significantly reducing inductance.\u003c\/p\u003e\n\u003cp data-start=\"1820\" data-end=\"2061\"\u003eWhere conventional speakers struggle with electrical resistance, the T5 Silver Supreme Edition works with unprecedented freedom. The result is a soundstage of extreme clarity, precision, and calm – where even the smallest nuances stand out clearly.\u003c\/p\u003e\n\u003ch3 data-section-id=\"15w9j7n\" data-start=\"2068\" data-end=\"2097\"\u003eA World-Class Diaphragm\u003c\/h3\u003e\n\u003cp data-start=\"2099\" data-end=\"2226\"\u003eThe diaphragm is built as an advanced sandwich construction with an aramid honeycomb core between layers of spread tow carbon fiber.\u003c\/p\u003e\n\u003cp data-start=\"2228\" data-end=\"2443\"\u003eThe materials are carefully selected to achieve the perfect balance between low weight and maximum rigidity. The addition of graphene and boron whiskers further strengthens the structure and ensures stable, resonance-free reproduction.\u003c\/p\u003e\n\u003cp data-start=\"2445\" data-end=\"2497\"\u003eThat means you hear the music – not the material.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1dsyjjx\" data-start=\"2884\" data-end=\"2928\"\u003eCryogenic Treatment for an Optimal Soundstage\u003c\/h3\u003e\n\u003cp data-start=\"2564\" data-end=\"2746\"\u003eAll metal parts in the speaker undergo advanced cryogenic treatment. Extreme cooling optimizes the structure of the material, improving both strength and electrical conductivity.\u003c\/p\u003e\n\u003cp data-start=\"2748\" data-end=\"2873\"\u003eIt is a process that cannot be seen – but can clearly be heard. The result is a more open, calm, and natural soundstage.\u003c\/p\u003e\n\u003ch3 data-section-id=\"jexz6y\" data-start=\"3425\" data-end=\"3446\"\u003eThe Børresen Tweeter\u003c\/h3\u003e\n\u003cp data-start=\"3448\" data-end=\"3628\"\u003eBørresen has used advanced FEM calculations to make the magnetic field more linear and efficient. This gives the driver easier movement, high efficiency, and precise reproduction.\u003c\/p\u003e\n\u003cp data-start=\"3630\" data-end=\"3795\"\u003eThe tweeter has an efficiency of no less than 94 dB and plays from approximately 2.5 kHz and up. The moving mass weighs only 0.01 grams, making the tweeter extremely fast.\u003c\/p\u003e\n\u003cp data-start=\"3797\" data-end=\"4010\"\u003eThe tweeter is built to withstand very high levels without distortion and can handle powerful transients without causing listening fatigue. Børresen has also completely avoided the use of transformers in the design.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1esoixy\" data-start=\"4017\" data-end=\"4065\"\u003eCrossover – Unique and Technically Advanced Solution\u003c\/h3\u003e\n\u003cp data-start=\"4067\" data-end=\"4251\"\u003eBørresen speakers are equipped with serial crossovers, where the drivers share the same electrical current. This means that the signal remains phase-locked as it shifts between the drivers.\u003c\/p\u003e\n\u003cp data-start=\"4253\" data-end=\"4444\"\u003eUnlike parallel crossovers, the serial crossovers route signals outside the operating range around the drivers, creating a more coherent system and taking the music experience to a new level.\u003c\/p\u003e\n\u003ch3 data-section-id=\"euw41p\" data-start=\"4451\" data-end=\"4485\"\u003eBi-Amping for Better Sound Quality\u003c\/h3\u003e\n\u003cp data-start=\"4487\" data-end=\"4626\"\u003eWith bi-amping, you can send power separately to the woofer and the midrange\/tweeter section. This provides both more power and a cleaner, more precise sound.\u003c\/p\u003e\n\u003cp data-start=\"4628\" data-end=\"4796\"\u003eBørresen supports both passive and active bi-amping. With active bi-amping using an external crossover, you can adjust the crossover frequency yourself and optimize the sound for your listening room.\u003c\/p\u003e\n\u003ch3 data-section-id=\"otkpe4\" data-start=\"4803\" data-end=\"4853\"\u003eAdvanced Cabinet Design for Maximum Performance\u003c\/h3\u003e\n\u003cp data-start=\"4855\" data-end=\"4994\"\u003eThe Børresen T series combines high-gloss lacquer with real wood veneer. Solid wood and carbon fiber reinforcements increase both rigidity and airflow.\u003c\/p\u003e\n\u003cp data-start=\"4996\" data-end=\"5153\"\u003eA rear-facing ventilation system reduces distortion and ensures effective pressure relief. The result is an open, dynamic, and precise sound in an elegant design.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1bki2us\" data-start=\"5160\" data-end=\"5211\"\u003eAnsuz Gold Signature – The Most Advanced Cables\u003c\/h3\u003e\n\u003cp data-start=\"4523\" data-end=\"4722\"\u003eWith Ansuz Gold Signature cables, the signal is elevated to a level where nothing is lost. Advanced technologies such as the Tesla Coil Principle and analog dither are actively used here for noise reduction.\u003c\/p\u003e\n\u003cp data-start=\"4724\" data-end=\"4826\"\u003eThe result is a blacker background, greater calm, and an even clearer presentation of the music’s details.\u003c\/p\u003e\n\u003ch3 data-section-id=\"218njk\" data-start=\"5360\" data-end=\"5384\"\u003eThe Tesla Coil Principle\u003c\/h3\u003e\n\u003cp data-start=\"5386\" data-end=\"5533\"\u003eThe principle is based on a double inverted coil that effectively reduces electrical noise and enhances the sense of silence and detail in the music.\u003c\/p\u003e\n\u003ch3 data-section-id=\"nu6yhh\" data-start=\"5540\" data-end=\"5568\"\u003eActive Square Tesla Coils\u003c\/h3\u003e\n\u003cp data-start=\"5570\" data-end=\"5687\"\u003eBuilt-in Tesla coils in the circuit boards ensure significantly improved noise reduction compared to passive solutions.\u003c\/p\u003e\n\u003ch3 data-section-id=\"vn78ss\" data-start=\"5694\" data-end=\"5736\"\u003eAnalog Dither Technology 3rd Generation\u003c\/h3\u003e\n\u003cp data-start=\"5738\" data-end=\"5862\"\u003eThis technology improves the signal and reduces background noise, resulting in a more detailed and open sound experience.\u003c\/p\u003e\n\u003ch3 data-section-id=\"clei6e\" data-start=\"5869\" data-end=\"5909\"\u003eAnti Aerial Resonance Coil Technology\u003c\/h3\u003e\n\u003cp data-start=\"5911\" data-end=\"5989\"\u003eReduces airborne noise and ensures clean signal transmission without interference\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"T5 Silver Supreme Edition \/ Black High Gloss","offer_id":55216705831288,"sku":"55216699867512","price":1492915.0,"currency_code":"DKK","in_stock":true},{"title":"T5 Silver Supreme Edition \/ Real Wood Walnut","offer_id":55216705864056,"sku":"55216699867513","price":1492915.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Silver_T5_1_white.jpg?v=1753438477"},{"product_id":"borresen-c2-kopi","title":"Børresen C2 White High Gloss (used)","description":"\u003ch2\u003eBØRRESEN C2 – GROUNDBREAKING AUDIO TECHNOLOGY AND EXCLUSIVE DESIGN\u003c\/h2\u003e\n\u003cp\u003eBørresen C2 is a masterful example of modern acoustic engineering and design. This high-end floorstanding speaker combines advanced materials, innovative technologies, and refined aesthetics to deliver an unparalleled listening experience. With its carefully engineered cabinet structure, revolutionary DCC5 Neo driver technology, and ultra-light Børresen RP94 ribbon tweeter, the C2 represents a new standard in sound quality and precision.\u003c\/p\u003e\n\u003cp\u003eWith a frequency response from 35 Hz to 50 kHz and a sensitivity of 88 dB, the C2 offers dynamic and detailed reproduction that immerses you in the music. The elegant design with glossy black and white carbon-fiber side panels makes the C2 a visual masterpiece that can be integrated into any exclusive interior.\u003c\/p\u003e\n\u003ch3\u003eHIGHLIGHTS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBørresen DCC5 Neo driver with a unique diaphragm construction for reduced resonance and maximum rigidity.\u003c\/li\u003e\n\u003cli\u003eBørresen RP94 ribbon tweeter with an efficiency of 94 dB and a moving mass of only 0.01 grams.\u003c\/li\u003e\n\u003cli\u003e2 x DCC5 Neo woofers that ensure deep, powerful, and precise bass reproduction.\u003c\/li\u003e\n\u003cli\u003eSeries crossover for more phase-accurate and coherent sound.\u003c\/li\u003e\n\u003cli\u003eExclusive cabinet design with carbon-fiber panels for minimal resonance and maximum sound quality.\u003c\/li\u003e\n\u003cli\u003eAnsuz Darkz S2t feet with titanium balls for optimal mechanical grounding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eREVOLUTIONARY DCC5 NEO DRIVERS – PRECISION AND CONTROL\u003c\/h3\u003e\n\u003cp\u003eBørresen’s unique DCC5 Neo drivers are constructed with a diaphragm that combines three layers: two layers of spread-tow carbon fiber and a honeycomb-structure core. This build ensures maximum rigidity and reduces resonances to a minimum, eliminating unwanted vibrations and providing incredibly clean sound reproduction.\u003c\/p\u003e\n\u003cp\u003eUsing a magnet motor with dual copper caps and N52 neodymium magnets, these drivers achieve a perfect balance between high flux and low inductance. This reduces electromagnetic distortion and eases the load on the amplifier, ensuring more dynamic and precise music reproduction.\u003c\/p\u003e\n\u003ch3\u003eBØRRESEN RP94 TWEETER – ULTRA-FAST AND DETAILED\u003c\/h3\u003e\n\u003cp\u003eThe advanced Børresen RP94 ribbon tweeter has a moving mass of only 0.01 grams, making it extremely fast and responsive. With an efficiency of 94 dB, this tweeter reproduces the finest musical details with exceptional clarity and precision. The tweeter’s ability to handle high transients without distortion makes it ideal for both complex musical passages and dynamic movie scenes.\u003c\/p\u003e\n\u003cp\u003eThe fully ventilated construction and optimized magnetic flux ensure excellent linearity and efficiency, contributing to a natural and harmonious listening experience.\u003c\/p\u003e\n\u003ch3\u003eSERIES CROSSOVER – PHASE-ACCURATE SOUND\u003c\/h3\u003e\n\u003cp\u003eThe C2 uses a series crossover that ensures phase-accurate power distribution to each transducer in the critical filtered frequency ranges. This advanced solution is significantly more complex to implement, but it provides coherent and natural sound reproduction. The result is a balanced soundstage with incredible precision and realism.\u003c\/p\u003e\n\u003ch3\u003eEXCLUSIVE CABINET DESIGN – FUNCTION AND AESTHETICS IN HARMONY\u003c\/h3\u003e\n\u003cp\u003eThe Børresen C2’s cabinet is made from a robust wood composite with internal bracing that eliminates resonances and standing waves. 1 mm-thick carbon-fiber side panels increase rigidity and reduce mechanical influence. This construction ensures clean and undisturbed sound, even at high sound pressure levels.\u003c\/p\u003e\n\u003cp\u003eThe glossy black and white side panels combine aesthetics and functionality, giving the speaker an exclusive and timeless design that stands out in any room.\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"White High Gloss","offer_id":55487744573816,"sku":"85200","price":109000.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/BC02_WHITE_SIDESKEWED_NoBg.jpg?v=1737371483"},{"product_id":"borresen-05-silver-supreme-edition-b-stock","title":"Børresen 05 Silver Supreme Edition B-Stock","description":"\u003ch1 class=\"MsoNormal\"\u003e\u003cspan\u003eBørresen 05 Silver Supreme Edition B-Stock (sold on behalf of customer)\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cmeta charset=\"utf-8\"\u003eOne of the speakers tilts slightly to the side due to a minor production defect in the cabinet (hence the price). \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eHas no impact on sound quality.\u003cbr data-start=\"232\" data-end=\"235\"\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eOtherwise in very good condition and delivered with original flight cases.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eNew price: DKK 1,243,400.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eUsed. Price: DKK 395,000.\u003c\/span\u003e\u003c\/p\u003e","brand":"Børresen","offers":[{"title":"Default Title","offer_id":55496295612792,"sku":"55496295612792","price":395000.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/6253\/3137\/files\/Borresen_05_supreme_3.jpg?v=1773152235"}],"url":"https:\/\/www.lydspecialisten.com\/collections\/borresen.oembed","provider":" Lydspecialisten","version":"1.0","type":"link"}